my project wellcraft 180 fisherman

slick_insanity88 said:
Manny.. looking good! That bracket setup looks clean, I love it. Correct me if I'm wrong, but I'm guessing you're in Miami judging by the 305 number on the bracket? I was born and raised there :beer:
Click to expand...

thanks slick and yes i am in Miami the bracket was made by a local guy and for a grate price the craftsmanship is perfect i have no complains

dose any one know how to wire the motor to the gauges when i got this boat all the wires and fuse box was remove
 
Thanks I allready starter to buff it and clean it here is a pic
null_zpsfc59db0e.jpg
 
hey guys can some one show me how the gas line is suppose to be setup dose the prime ball go before the filter or after the filter

thanks
 
macojoe said:
with gas!!
Click to expand...

lol i meant how will be the best way to prime it after i put gas in the tank

btw here is a small update i was not going to paint the center console but i starter to the sides boxes witch hold the rods and i end up painting the center console here is some pics i will show the boxes later tomorrow

here is before


and after


 
small update i just finish wiring the gauges and switches here is a pic btw don't mind the old speedometer i am not using that one but i wont pay 70 to just cover the hole :rotflmao

 
here is some updates



now this is how my water pump was inside





i install the new one and problem solve for now i am having issues starting the motor and with the rpms not showing on the tachometer
 
Looking good. Damn, I wish we had clear water up here so we could snorkle/shallow dive. I'd love to do it, but up here you can't see more than 3 feet in front of your mask. Scares the sh!t outta me like that. There used to be an underground fed fresh water lake near here.. 15-20 feet to the bottom and you could see the bottom from the surface... Then some land developer got the great idea to fill it in and make a shopping mall... :cen: That was the end of my snorkeling/diving. <sigh>
 
well i finally tested the motor here is a video of how its doing i found out there is a small pump on the side of the motor with the red nob when i unplug it the motor turns on with no problem and when i plug it back on the motor wont start what happens if i live it off do i need it

here is the video


here is the small pump am talking about

 
that's the enrichener. That should only have power to it when you push the key in. Check your key switch wiring and operation, sounds like you may have a bad key switch
 
spareparts said:
that's the enrichener. That should only have power to it when you push the key in. Check your key switch wiring and operation, sounds like you may have a bad key switch
Click to expand...

there is a few things i have to check like the wiring on the key switch my my tachometer don't work and is brand new but i am sure the pump is on the open position all the time about the key switch when i turn on the motor and i try to put the key on the off position the motor stay on the only way i turn of the motor is by the kill switch where can i get a good wiring diagram for this motor
 
You must log in or register to reply here.
Back
Top