New profile posts

Nice Boat Love the curtains.

If you still are still offering the bowrail, please give me a call (901)488-8426 Bill

Hey
First i must say you have the best thread Ive found. Im considering taking on a 75' steplift and would like to restore it similar to your CC restore> I have a million questions. Feel free to email call or text 302-362-0307. I would like to send you some pics to see if you think its a good hull to take on. The gel coat is rough
Thanks
Bryan

Hello. Im new to this group. I have just aquired a 1974v20 steplift in pretty great shape. It has the 165hp 6cyl with omc outdrive. I originally bought it for the motor for my 1966 23 foot john allmand ticonderoga, but after looking at the boat im sure I would get better gas milage on the wellcraft than my allmand. Question is I have a 1978 mercury 140 hp inline 6, 2 stroke. Was woundering if it was a better idea to put my merc on the wellcraft, and put the 165 in my allmand. Any ideas?

Hi the best method is to put a layer of 3/4 oz chopped strand mat over the top,that way you won't see the weave

Manny,

Checking out your post on your rebuild...a few questions.

1. When you said you used the "rubber stuff" to coat the floor what did you mean...durabak or hurculiner? (which we are considering) or something else? Smooth or textured?
2. What did you paint your center console with...are you happy with the results...the photos look good.

Our link is here...kind of a mess to follow but lots of good photos. Stringers and floor redone: http://www.wellcraftv20.com/community/showthread.php?t=20093

Thanks.
Shawn

Liam,

We got our floor installed and fiberglass laid tonight with 1708. I'm a bit concerned how textured the 1078 & resin will leave the floor...knowing how it was on the stringers.

Do many builders put another coat of resin down to level out the rough nature the 1708?

We are going to put a durabak or line-x textured floor in so it will have roughness to it anyways but hope to smooth even the roughness of those products with a 2nd coat of the non-textured.

All from this post you commented on: http://www.wellcraftv20.com/community/showthread.php?t=20093&page=2

Morning, i have an old wellcraft v-20 steplift that when you turn the steering wheel it clicks like the gears in the steering are jumping each other and the motor will not turn. has anyone had this happen, and is it more like the steering cable gone ore the steering box gone?

Hey Chasapeake 724, was wondering if you had anymore of the Wellcraftv20.com stickers like you sent before, I'd really like to buy some. Thanks
Carroll Felton
cwfelton@centurylink.net

Hey Spare - please take a look at the thread I just posted in General - Electronic ignition for 170. I trust your advice - you really helped me through my alternator and water pump repairs. Thanks - Scott

Newly activated,just bought FrankO s v20

Hey Val...guy named shurlock PMd me says he tryin to get on as new member...I see where it says welcome new member and his name...can ya contact him?

How much do want for them? It's for my sons boat. He bought it a few months ago and the engine had to be rebuilt right away. He really wants an enclosure but the rebuild cost him way more than he expected. If they are close to the right size it would be cost effective to modify them to fit.

Robert,

I do, but I don't think they will fit the '88. The side curtains came from a '74 when the windshield was not as wide. But if you think you can make them work I'm willing to part with them.

Rick

Do you have front and side covers for a v20? Sounded like you might from one of your posts. My son just got a bimini for his 88 v20 and wants front and side curtains. Thanks,
-Robert

The shaft just pulls out, then you put the plug back in it's place.

Hey TM quick question maybe you know if you remove the oil injection off of a 175 mercury how do you remove the gear or shaft that goes down in the block??

What you been up to?

root@localhost says, pictures wont upload, just keeps giving me and error message.

Internal Server Error

The server encountered an internal error or misconfiguration and was unable to complete your request.

Please contact the server administrator, root@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error.

More information about this error may be available in the server error log.

Apache/2.2.15 (CentOS) Server at www.wellcraftv20.com Port 80

Yea I was over in Crowley La the other day that's a long ride from mobile.