Latest activity

flat calm BUT. You brought up a good point. We trim the engine down and don’t touch it all day. So I hav3 to try trimming up the engine...

That was running just like in my avatar, on the last 1/3 of the hull with the engine trimmed out till it cavitated, then back in till it...

Assume you are trimming the motor up at speed to get the nose out of the water and increase speed? Also what were conditions, flat...

You and your dad were angels taking the orders and getting everything done. I still have my hats, sweatshirt and several t-shirts that...

Scroll up and have a look at my first post and that has all of my info on my boat. Next, are you the original owner? Get the serial...

It is only me and my son on her. We do carry a lot of fishing gear. But the weight is not the issue. The rpm’s are within range and with...

I would think 36 is on the low side of normal, so you might try a 15x19 prop if you can find one to borrow for "Testing". That should...

No bottom paint. 15 x17 inch prop. No growth on bottom. I keep her on a trailer. So 36 mph is not good? The rpm’s are in range. Under...

Made a little progress. Ordered a couple more a-rigs, 3/8 oz bucktails in white and chartreuse and some 7.5" pearl white curly tail...

Mine was a little slower, around 38 mph. I bought mine from a friend who owned a prop shop. At the time, we were doing a lot of...

Mine was a little slower, around 38 mph. I bought mine from a friend who owned a prop shop. At the time, we were doing a lot of...

Clean bottom, propped and trimmed right, low 40's is what I've experienced with my 150 yamaha 2 stroke.

First question is are you reaching the engines designed RPM powerband? My V21 had an OMC 200 Ocean Pro with 4500-5500 rpm WOT powerband...

36 mph. Not knots. Is that good? 150 mercury with a 15 X17 inch prop. W.O.T. And offourse on a 20 6 wellcraft Steplift

To sum up my repower adventure, everything went very smoothly thanks to the help of my mechanic — and good buddy — who owns a small...