Wtb

BillTex

Junior Member
Hi All, scored a nice 87 Cuddy this weekend! Need a few parts;
* 1 bait box
* arm rest/cushion for both starboard and port sides
* rear bench seat (of course)

Thanks-let me know what ya got!

Bill
 
You can make those arm rests pretty easily. I filled the holes where mine were, but I've thought varnished teak would look good there too.

Good luck with that bench seat. lol.
 
I think I have the arm rests. They may not be the prettiest but if I remember correctly they were solid. I'lol check in the am.
 
The bait bins have always been easy to break and hard to find. I thought somebody found a small plastic bathroom trash can at walmart/kmart/dollar general that would fit and work.
Maybe tupperware piece?
 
I replaced arm rests with 1/4" black Starboard.

I have two bins but not sure if I might use them again. They are currently out because I mounted flush rod holders pointing out 90 degrees to centerline and they prevent the bins from fitting.
I find the bins are not a great use of that space.
One of my daydream configurations is to glass over those lids & bins and mount rodholders/downriggers there. Then cut in access hatches in the bulkheads like the V21s have.
That would allow more use of all that space and easier access to drain fittings.

If I ever do this project I will have two bins and two hatch lids to post here...
 
Last edited:
Thanks all...some good ideas. If anyone does want to sell any of these items...please let me know.

Unfortunately, i brought the new boat home and put it right to sleep for winter...it's going to be a long one!

Bill
 
Hi all, i have seen mention of bin liners available from tempress...does anyone know which PN would fit the 87 bins?

Thx, bill
 
I don't think there is a source for the oem part. Just have to find a "will fit". Somebody was going to make a mold from an existing one and make fiberglass replacements, but never heard anymore about that.

If you find one, please post source.
 
Back
Top