windshields

  • Thread starter Thread starter racerx
  • Start date Start date
R

racerx

Guest
still looking for some glass for my 92 cuddy. if any of you newer guys have any leads it would be greatly appreciated. also, if any of you guys have a 79 thrue 84 v20 cuddy i would realy appreciate some measyrements across the bottoms of the front glass. that way i will know what models will fit. i know pre 78 will not fit. tx
 
appreciate it bud but, not neccesary. 86 is same as 92, or so i've been told.
 
got the cash in hand, still waiting on the dude. even if the deal ever happens, i still gonna need glass for my 92! oh yea, i finally got a name for my welly. see it on just about every other truck in town here. just hit me as the perfect name for my katrina ravaged rig when i was leaving home depot yesterday...DISASTER RELIEF
 
How long can you wait. I just picked up full set glass and frames off boat at Budget Boats in Chesapeake Va. Plan on updating my old ones on 73. When I do it . Frames are not bad but the gaskets need work. Will they work for you??? ??? ???
 
dont think so bud. as near as i can tell, there are two types of windshields, pre 78 boats have a larger center and smaller sides, and 78 up has larger sides and smaller sides. or vice-versa i am not sure. i only know this from looking at pics in the gallery. i do appreciate it though. BTW, how much did you payfor ur glass, if you dont mind me asking? tx
 
RACERX:

I HAVE A 1979 CDDY CABIN, I'LL MEASSURE IT FOR YOU, BUT NOT TILL NEXT WEEK, I'M AWAY FROM HOME.

LOOK FOR ANSWER NEXT WEEK.

LESTERUS
 
RX I have an 83 and i have the rough measurments. The side panes are 30" across the bottom X 24" tall X 25" across the top. The center pane is 23" wide X 24" tall. These are not exact as I did it in the dark, can get more exact if you need it.
 
tx fatdaddy, sounds like a match! i got nothin left but the bottoms of the frames to measure. iget, on the sides, 30 inches. then between the two sides i measure 22 and 1half inches. plus the couple inches you got to play with when you mount them.... this is great news. if a 83 will fit, that much more likely that a 79 will!!!! and i know this realy GREAT GUY (charming, good looking, just a super dude) that has a set. ;) ;)

cool, cant wait to hear from LES.
 
woohoo!!!! it'll be next week tommorrow!!! when ya comin home les?


i'm so excited......i just cant hide it......i'm about to lose control and i think i like it........
sry
 
I have a boat spotted in Port Lavaca, Texas. I don't know what year it is but I heard he would take a couple of hundred dollars for it. All I need is the sliding hatch on the cuddy cabin. All of the glass looks intact from a distance. One side is leaning in but I think the support wall under the steering wheel is loose. I will try to see the boat on Monday or Tuesday.
 
cool axman, i will call in sick tomorow and set here in front the cpu all day waiting to hear. well, maybe not but, sounds great bud.tx
 
The boat is a 1974 model and all of the glass is intact. I don't remember what year models you were looking for. Later
 
dadgummit! nope, 74 wont work. but thanks for the thought, and the effort. MULV.......!
 
Yo Racer, I took measurements today when I stopped by my parents. The width of the front panels is 30" and the side is 53" I took some pics and will post them after my mom uploads them from her camera that I borrowed to take the pics.
 
The center section has been replaced with plexi-glass by the previous owner. the frames have some corrosion from saltwater and one side has a hole where a windhield wiper motor was installed in the frame. I have no idea how you are ever going to be able to have these shipped in one piece but I'm all ears.

windshield3.jpg


winshield.jpg


windshield4.jpg


windshield2.jpg
 
You must log in or register to reply here.
Back
Top