Tilt & Trim Question

N

nymack66

God
Questions guys
A two wire system Evinrude 1987 BLUE and GREEN only from the T&T Note T&T removed from Boat
Question how do you test it correctly ? My theory is TILT HOUSING is GROUND, Connect BLUE=SKY(UP) to Positive
GREEN= GRASS (DOWN) to Positive is this correct ?
 
nymack66 said:
Questions guys
A two wire system Evinrude 1987 BLUE and GREEN only from the T&T Note T&T removed from Boat
Question how do you test it correctly ? My theory is TILT HOUSING is GROUND, Connect BLUE=SKY(UP) to Positive
GREEN= GRASS (DOWN) to Positive is this correct ?
Click to expand...

the motor is 2-way when you want it to go up then hit the blue to positive and the green to negative and for down hit the green to positive and the blue to negative.
 
ct is correct.
The motor is a reversible polarity type, the relays of the tilt and trim do the reversing for you.
I can't remember which one was which but lets say blue is up.
Connect the blue wire to the positive battery terminal and the green wire to the negative one, the motor tilts up. Reversing these wires makes it go down.
Not really sure we are right?? Get an ohm meter and see if you get a reading to either of the wires from the housing.

And don't try to jump out ahead of the relays or at the switches, the smaller control wires might not handle the load.
 
Last edited:
If you find yours is bad I just ordered one from the one listed first on this link. It actually just came in the mail today and for a cheap after market it seems pretty heavy duty. I like that it uses that composit type hard plastic instead of metal. I went with the cheapest one because the boat is sold but I said I would replace the motor. The one on there now is so rusted I don't even know how its still working.
http://wellcraftv20.com/community/showthread.php?t=11534
 
You must log in or register to reply here.
Back
Top