They are Here

MSBHAMMER said:
Yes, it is the end of the world :'( :'( :'( :'( :'( :'(.
I thought these were close to what REEL had on his V ???
Click to expand...


Nope...not like REEL'S...but whole time I's readin' thru this I's thinkin' what MJ said about mountin' 'em on the windshield bulkhead ... I think they'd be REELY COOL there 8) 8) ...tell ya what...have Lisa hold one of 'em in place under the windshield, post the pic and we'll vote on it ;) ...power of the board ;D ...

Wire around (forward of it) the hatch opening...I've got several wires goin' around front of mine...just gotta hide/secure 'em ;) ...I think those lights gonna look GREAT up there ;D ...
 
I would have to mount these on the sides correct. On the short side of the windshield. Port/starboard side.
Hoping I have access on the sides. I'll give it a shot I guess. Dont wanna eat 66 bucks on my stupidity. :-/
 
If Lisa is in the Hooters shirt, you guys may not be able to give a fair and reasonable vote on how her lights/ oops I meant my bow ligts work. :P
 
Reel, Like this:

DSC02516.jpg


Or I guess more like this ?

DSC02515.jpg
 
Its a factory Wellcraft decal made out of hard plastic.
Well, I guess I will try and see if I can install the lights there. Just hope I can get a wreck in there to tighten te bolt down. Could just screw it to the side, but would get loose I think.
 
MSBHAMMER said:
Its a factory Wellcraft decal made out of hard plastic.
Well, I guess I will try and see if I can install the lights there. Just hope I can get a wreck in there to tighten te bolt down. Could just screw it to the side, but would get loose I think.
Click to expand...



Lots a stuff on mine been screwed down since 1999...as long as it's not structural or bears LOTS of weight...heck, screw 'em...if they work lose later, you can always go back and thru-bolt 'em ;) ...
 
Reel, MJ, Hammer and anybody that's got them lights: Is there any problem of reflection at night by the lights distracting or blinding you? I had already made up my mind to mount mine there but was worried it.
 
I am going to mount mine in the same place, as for wires I am going to go all the way around the cabin, use some zip ties to hold.
As for screwing them on, Just drill and screw with some caulking, Not 5200!!
5200 will glue there forever!! Just some light caulk will be fine. You might need to replace at some time?

See you went and out bid me, Now I punish you, and gave you the wrong ones!! ;) ;D
 
everything is 1/2 priced used!! and its not in the store so they are used!! PM address I will send the $33 bucks right away!!
 
Tell him to get away!!!!!!!!!!! >:( >:( >:( Whats he trying to get it onm my deal!!

Man I can't leave for a second!!
 
Remember we discussed putting the lights on either side of the pulpit,
just angle them out board.

Oncoming vessels are who need to see them.

HAMMER, it was a nice visit this afternoon, pictures just don't
do justice to all the projects you are accomplishing.
 
You must log in or register to reply here.
Back
Top