They are Here

My LED bow lights arrived. Looking pretty sharp. They arrived quick as well from Australia.
66 bucks that encluded shipping as well.

DSC02510.jpg
 
Gotta decide now, that starborad for the pulpit is 1 1/2 thick. Will the size of te pulpit block the lights??? or should I have a 1 1/2 spacer made for each bow light to sit on. Or mount the lights to the pulpit, but the chain could hit the lights ??
 
It's OK if the pulpit blocks the lights. They should only be seen from one side of the boat anyhow.

Looking good Hammer :)
 
Thanks for the info guys.  ;)

Took only 10 days I believe. Was held up due to the Easter weekend. Thats ok though, I wont be installing them till I get me some starboard. Thats next. well after I get the other tilit trim motor next weekend in Philly.
 
I hate to say it but they look like side lights??

Side lights have a lens that goes from front to back like them, so you can see them from front and side of boat.

Bow lights lens go front to side so you can see front and side while driving.

Side lights here, as you can see you see from front or side light runs front to back

http://www.iboats.com/Perko_Vertica...d.236392--list_time.1176507484--view_id.39382


Bow lights, as you seee here they run side to side to see front and rear

http://cgi.ebay.com/ebaymotors/PERK...tegoryZ26448QQihZ009QQitemZ190101628022QQrdZ1
 
The more I look at these lights, the more pissed I get.
Didnt realize they were side light >:( >:( >:( >:(
M.J. so how ya gonna wire yours ? You have access to where they be mounted at. What about getting to the otherside behind the helm to the fuse box. Cant just cut acroos te the bow because of the hatch. ??? ???
 
Back
Top