Skool's V20 Rebuild starts

Skools Out

Skools Out

God
Before pics as of this afternoon before i got out the saws


MVC-13S.jpg


MVC-14S.jpg


MVC-15S.jpg


MVC-16S.jpg


MVC-12S.jpg


MVC-11S.jpg


MVC-10S.jpg


MVC-09S.jpg


MVC-08S.jpg


MVC-07S.jpg


MVC-06S.jpg


MVC-05S.jpg


MVC-04S.jpg


MVC-03S.jpg


MVC-02S.jpg


MVC-01S.jpg




ok Hammer look here ya go 40 min later

MVC-017S.jpg


MVC-018S.jpg


MVC-019S.jpg


MVC-020S.jpg
 
Man you wore that deck out in nothing flat 8) 8)

I noticed that deck didn't have individual wood blocks fiberglassed to the underside.

Also how are you going to replace it?
 
Might I ask why you chose to cut it out rather than seperate the cap and hull? I ask because mine needs a new floor and transom and I thought it would be easier to just seperate the two rather than section it out.
 
All I can say is wow Skools! I doubt I could ever attempt the projects you have taken on. My hat is off to you.
 
to much work to remove the cap my V has a solid new transom, and by the way it had the blocks under the floor i just finished taking them off more pics tomorrow, i'm going to remove the extra tank inthe boat it has a 60 gal and an added 25 gal, i'm taking out the 25 and going to add foam to the hull in all the voids to add floation.
 
Woulda SWORE that floor-deck would be a lil' beefier than what's layin' on the ground :) ...nothin' between that and stringer?...


Strap in boys...this'll be fun to watch...somebody plug in the popcorn popper ;) ...
 
same thoughts Reel the floor was 1/2 inch reg plywood scrap blocks but i'm replacing with same wood i used in the floor hatch for my 21. i'm using 3/4 13 ply marine wood ;D she'll be strong as hell when this floor is completed and i want to add a few stringers to solid up some areas.
 
I've heard they used small squares of ply wood, but damm!  Why would they do that instead of just one or two big sheets?
 
You must log in or register to reply here.
Back
Top