scupper self bailing deck
- Thread starter TMcGovern
- Start date
S
Seakindly
Guest
Re: scupper self bailing deck
Welcome Tmcgovern.
Search and ye shall find. 8)
http://www.wellcraftv20.com/cgi-bin...neral;action=display;num=1063898481;start=2#2
Welcome Tmcgovern.
Search and ye shall find. 8)
http://www.wellcraftv20.com/cgi-bin...neral;action=display;num=1063898481;start=2#2
K
keithboyd
Guest
Re: scupper self bailing deck
Docked in pirates cove huh? What a nice place!!! The v20 must be the smallest boat there with the same flair as those Carolina boats.
I have a 86 cutty. I replaced my thru hull fittings a couple of years ago becaused they just broke apart when I tugged on them. I can't believe Wellcraft put a plastic thru fitting below the water line. I'm waiting for a set of stainless thru hulls now from Boaters World. The drains inside my cockpit seem to be in fine shape. Maybe I should check on replacing them also.
Did you find something that keeps water from backing back into the cockpit, this is a problem for me. When I asked about that before on this site I got a bunch of comments about drinking less beer and losing weight.
This is a fun site, I think you will enjoy it. It seems most of these guys are from up north. Its good to have a Nags Header on here.
Docked in pirates cove huh? What a nice place!!! The v20 must be the smallest boat there with the same flair as those Carolina boats.
I have a 86 cutty. I replaced my thru hull fittings a couple of years ago becaused they just broke apart when I tugged on them. I can't believe Wellcraft put a plastic thru fitting below the water line. I'm waiting for a set of stainless thru hulls now from Boaters World. The drains inside my cockpit seem to be in fine shape. Maybe I should check on replacing them also.
Did you find something that keeps water from backing back into the cockpit, this is a problem for me. When I asked about that before on this site I got a bunch of comments about drinking less beer and losing weight.
This is a fun site, I think you will enjoy it. It seems most of these guys are from up north. Its good to have a Nags Header on here.
M
MikeB
Guest
Re: scupper self bailing deck
I replaced my scuppers on my v-20 cc with ball scuppers. Its seems to work much better than the old style. They sucked. Got them at West Marine but I see everyone sells them now. They just screwed right on in the same fashion. Ofcourse mine are above water line scuppers( well supposed to be anyway).
Mike
I replaced my scuppers on my v-20 cc with ball scuppers. Its seems to work much better than the old style. They sucked. Got them at West Marine but I see everyone sells them now. They just screwed right on in the same fashion. Ofcourse mine are above water line scuppers( well supposed to be anyway).
Mike
Airslot
God
Re: scupper self bailing deck
If your talking about the thru-floor part, I went to my local plumber supply house and the guy told me I was looking for a "bar stop". It was brass, the right size, and even came with a stopper which I use. Just remember to pull it out when it rains.
Lance
If your talking about the thru-floor part, I went to my local plumber supply house and the guy told me I was looking for a "bar stop". It was brass, the right size, and even came with a stopper which I use. Just remember to pull it out when it rains.
Lance