ROD BOXES

I had to do some very minor trimming and the cost was about $180 for the pair from FPmarine about two year ago. I'll see if I can find the link.

Airslot
 
I had to do some very minor trimming and the cost was about $180 for the pair from FPmarine about two year ago. I'll see if I can find the link.

Airslot
 
i have the fp marine sight but the ones on his sight recommended for the v20 are not square (rectangular). they look like i need to do alot of cutting.
 
i have the fp marine sight but the ones on his sight recommended for the v20 are not square (rectangular). they look like i need to do alot of cutting.
 
I can't find my old post. There was only a little cutting. I can't remeber if I had to cut along the bottom the length of the box, or along the forward end to make more lenght. Either way it was easy to do.

Airslot
 
I can't find my old post. There was only a little cutting. I can't remeber if I had to cut along the bottom the length of the box, or along the forward end to make more lenght. Either way it was easy to do.

Airslot
 
CHARLIE:

THE NEW ONES HE RECOMENDS FOR OUR V-20'S ARE THE ONES I BOUGHT FROM HIM, AFTER OUR CONVERSATION HE ORDERED SOME AND ADVERTISE THEM IN HIS SITE, THE ARE ABOUT 67" LONG AND YES, THEY ARE RECTANGULAR. IN MY CASE (1978 V-20) MY ORIGINALS WERE TRAPEZOIDAL, THEREFORE THE OVERALL LENGTH WAS ABOUT 70" SO I HAD TO DO A LOT OF CUTTING AND ON TOP OF THAT I WAS LEFT WITH A HOLE IN ONE SIDE I HAVE TO COVER. WHAT I DID IS INSTALLED A FIRE EXTINGUISHER INSERT NEXT TO IT, (PORT SIDE) AND I WILL MOUNT MY "EPIRB" (EMERGENCY POSITION INDICATOR RADIO BEACON" IN THE OTHER SIDE (STARBOARD) THAT WAY I WILL COVER THESE HOLES.

I'LL POST SOME PICS WHEN I HAVE A CHANCE, SHOWING EVERY STEP.

LESTERUS
 
CHARLIE:

THE NEW ONES HE RECOMENDS FOR OUR V-20'S ARE THE ONES I BOUGHT FROM HIM, AFTER OUR CONVERSATION HE ORDERED SOME AND ADVERTISE THEM IN HIS SITE, THE ARE ABOUT 67" LONG AND YES, THEY ARE RECTANGULAR. IN MY CASE (1978 V-20) MY ORIGINALS WERE TRAPEZOIDAL, THEREFORE THE OVERALL LENGTH WAS ABOUT 70" SO I HAD TO DO A LOT OF CUTTING AND ON TOP OF THAT I WAS LEFT WITH A HOLE IN ONE SIDE I HAVE TO COVER. WHAT I DID IS INSTALLED A FIRE EXTINGUISHER INSERT NEXT TO IT, (PORT SIDE) AND I WILL MOUNT MY "EPIRB" (EMERGENCY POSITION INDICATOR RADIO BEACON" IN THE OTHER SIDE (STARBOARD) THAT WAY I WILL COVER THESE HOLES.

I'LL POST SOME PICS WHEN I HAVE A CHANCE, SHOWING EVERY STEP.

LESTERUS
 
OH, I FORGOT, THE ROD HOLDERS: THE OLD ROD BOXES WERE DEEP ENOUGH SO THE ROD HOLDER WILL PROTUDE THRU A HOLE ON TOP OF THE ROD BOX, HOWEVER THESE ARE NO THAT DEEP SO I HAVE TO FIGURE OUT A WAY TO PUT THE ROD HOLDERS BACK, WHICH I HAVEN'T DONE YET.

LESTERUS
 
OH, I FORGOT, THE ROD HOLDERS: THE OLD ROD BOXES WERE DEEP ENOUGH SO THE ROD HOLDER WILL PROTUDE THRU A HOLE ON TOP OF THE ROD BOX, HOWEVER THESE ARE NO THAT DEEP SO I HAVE TO FIGURE OUT A WAY TO PUT THE ROD HOLDERS BACK, WHICH I HAVEN'T DONE YET.

LESTERUS
 
Lesterus, you are like me...don't post enough to get good at it :P ...we'll just have to do better, but believe me, if I can do it, YOU can do it ;D ;D ...
 
Lesterus, you are like me...don't post enough to get good at it :P ...we'll just have to do better, but believe me, if I can do it, YOU can do it ;D ;D ...
 
You must log in or register to reply here.
Back
Top