Rod and Tackle Storage Solutions

2

2ndCurse

Member
This box will replace the back to back seats. I'll put a cushion for a 134qt cooler on top and a couple of rod holders on the side. The top is removeable so I don't lose any space behind the tackle drawers. I'll stick things behind there that I won't use regularly.





v20%20001.jpg

v20%20002.jpg



<img src="http://www.forumpictureprocessor.com/pictureprocessor/images/v20 005.jpg">

The link is a pic of the rodholders on the splashwell divider. I added about 7" of starboard to the existing piece. Don't know why it posted differently than the others.
 
Last edited:
??

v20%20005.jpg

This box will replace the back to back seats. I'll put a cushion for a 134qt cooler on top and a couple of rod holders on the side. The top is removeable so I don't lose any space behind the tackle drawers. I'll stick things behind there that I won't use regularly.

So the door openings to the cabinets will be toward the center of the boat?
 
Last edited:
Yes, drawers will open in, towards the center of the boat. Just finished glueing and screwing. Box was just fitted together for pics. I'll sand and prep for finishing w/ screws in place. Once it's finished, I'll remove screws and bolt it together. The only ? I still have is what to use to keep the wood off the deck. Some type of bumper. The seat is mounted tight to the deck and holds water. I want to avoid that. I'm a few days away from installation anyway so I've got time to think on it.
 
You must log in or register to reply here.
Back
Top