Pulpit install / assembly...

Yeah Hammer, install those babies on your V. With the shag carpet and those lights all you'll need are some bead strings to hang from the cuddy door and an 8 track player and you'll be boating in style ;D
 
Thinking of another way to attach that pipe. Like a vnyle coated downspout to fit in the cut out, then attach the black pipe to that.
 
Well Hammer, if you wanna get trick about it, go to a plumbing supply house and get a pair of 4" closet flanges, stick em with some 4200 fast set, and put the drain pipe between them...

117846_front500.jpg


Edit to add: The top one is 4 x 3". This is the one you would really want:

6163067


Should be $6 or $7 each ;D
 
Yepper AIR, I thought about that as well.
BGA. Dont have the 8-track player, but have teh Fuzzy dice. All I need now are lift bags on the trailer to make the V bounce up and down. LOL. ;D ;D ;D ;D
 
Oh, one added benefit...

if you ever wanted a "bow mounted crapper" the plumbing would already be in place. ;D ;D
 
the problem with the pvc flanges is you would have to lift the cap 4 inches and set it down on the pvc nipple. dats why you need the expanding tubing, so you can compress it

you guys all complain about the llama lining, mine looks great and not a problem.
 
Well, I got my anchor locking pin and second 10" cleat today. The holes are drilled, but I probably can't finsh until tomorrow morning.
 
Nothing here to report AIR on my chain locker cap. Not until some O.T. comes in. But I did play with the plasma cutter again last night. ;D ;D ;D ;D
 
Well, I underestimate myself. I just got the bolts sealed and tight. Pulpit is done w/ 2 10" cleats, self launching roller, and anchor locking pin. I even have the anchor mounted. I still need to solve my chain pipe problem, but that no big deal... :)
 
I was just thinking, there are 19 bolts, a whole tube of 5200, and half a tube of 4200 involved in this project. I should be able to lift the boat by thr pulpit ;D
 
Well....good question. I may cover it with starboard and put the deck pipe through that too...

I may cut a new hole just off from the old one and use the plug w/ some Formula 27 to repair the area,,,

I may wake up Sunday morning and figure it out then ;)

One of the problems is that I haven't committed to a new larger size deck pipe, re-use mine, or replace with one just like it. Oh...the problems we face ;D
 
You must log in or register to reply here.
Back
Top