Pulpit install / assembly...

No word from Warner, I'm surprised he hasn't shown up on this thread ??? I'm going to use a piece of starboard and remount a chain pipe. My old one was probably a chrome over Zamac and is in bad shape. Everyting else is new so.... ;D

I may go with the larger chain pipe? The small one like mine is 1.5" inside. I'm sure it will pass a "chain splice" with 1/2" rope. It won't pass the rope with a prespliced loop with plastic chafe guard. More decisions?
 
LED's in action...

Pulpitinstall008-2.jpg


Pulpitinstall009-2.jpg


Pulpitinstall007-2.jpg


Pulpitinstall006-2.jpg


Pulpitinstall005-3.jpg
 
go large on the deck pipe, had the 1.5 and went to the large oval, makes feeding the chain and line in and out easier. after we go out, i hang the line over the bow rail and rinse & let dry then lay in the cuddy and reload in anchor locker. the large deck pipe makes this sooooo much easier.
 
Thanks Phat. Using the large deck pipe, do have anything connecting the deck to the anchor locker? With pics?

Thanks,
 
Was looking at deck pipes last night on E-Bay. Wasnt sure to go with teh round or oval. Pricey. :-/
Great pics. AIR, looked like a UFO encounter on those first Pics. ;D

Cold and Windy today. Will just look out the window and stair at the V today I think. ;D
 
Hammer great job brother, looks sweet. You should have had Lefty do like those car shows and present it for us ;D

And for your next project, I think you should install a balcony on the back of your house where the sliding glass door is on the second floor. Before CB and the Wind Talker get down there and walk out :o
 
AIR, you get stuck cutting any bolts. I did, cut a total of 16 bolts flush with the backing plate. What a pain that was.
Not the best pic., but its still a pic. ;D

DSC02584.jpg
 
airslot, this is a piece of 4" draintile(accordion style). it acts as a conduit between the topdeck and the shelf in the cabin to funnel the line into the locker. water also, i lost my cap about 8 years ago.

POL_0263.jpg
 
Thanks Phat, I knew that picture was around here somewhere. Anything holding the draintile inplace? I just so happens that I have about 1000' of that stuff laying around ;D
 
i kinda thought you might have access to it. i just cut it long and squeezed it in. i also left the screws on the deckpipe long and they fit inside the draintile.

POL_0268.jpg
 
Airslot said:
Thanks Phat, I knew that picture was around here somewhere. Anything holding the draintile inplace? I just so happens that I have about 1000' of that stuff laying around ;D
Click to expand...




Pimpin' dat HOA do have some fringe!!... 8) 8) ...






...and great idea on the extra-long screws to hold the pipe 8) ...LUV stuff like that ;) ...
 
Yo, whats up with Phats shiny, cute , clean carpet ;D
He must be steam cleaning it every season. My White looks more brown then white. ;D
AIR, I might have to beg ya for a piece of tubing the next time we meet.
And whats up with BGA posting those LED's, I want them !!. Thinking now I might have to sign in to Boaters Rehab. ;D
 
Hammer, if you poke around the town garage and tell them your looking for a piece of 4" corrugated drain tile / pipe, I bet they have it laying around.
 
You must log in or register to reply here.
Back
Top