On The Fly finished v20 CC w/bracket

  • Thread starter Thread starter on_the_fly
  • Start date Start date
O

on_the_fly

Guest
Hey guys, I never did post pics with the motor installed!

Here she is!

DSCN3866_1.jpg


DSCN3859_1-1.jpg


DSCN3860_1.jpg


DSCN3863_1.jpg


DSCN3859_1.jpg


DSCN3870_1.jpg


DSCN3867_1.jpg


DSCN3862_1.jpg
 
On_The_Fly:

I be interested in seeing a photo with the boat a rest in the water if possible.  If I remember right from your earlier postings you had the gas tank up forward to about the platform?  I would be interested in seeing how she sits with the 4-stroke and bracket aft and the tank forward.  Just wonderng how well she sits in the water.  I see the scuppers are below your water line back aft? Any problems there?

I agree with Willy - It's the best refit V20 I've seen.  Clean and simple!!!!


Kamikaze
 
Pretty 8) ...and catches fish, too :D :D ...OTF, hard to believe it's the same boat you posted swamped...that's CLEAN!! ya gonna T-Top 'er or what?...


...and don't be afraid to post some more pix...she's a real beauty...eye-candy for sure!! 8) 8) 8) ...
 
Thanks guys! she turns heads that's for sure—everyone asks "what kinda boat is that?" I actually got more attention than a 30' contender on the same face dock. Noth'in like a classic Wellcraft!!

I might put a t-top on her next season reelapeelin, and I will get some water shots next weekend. She sits nice in the water, and the scuppers are just above the waterline (I MEAN JUST ABOVE) She drains OK...I might go back to the ping pong balls. I am thinking of a pop up bow light next season or some real small red and greens on the console sides.
 
I REALLY like it !! I love tops, but that thing looks so good without it I might would leave it off.

Beautiful!
 
I know, fly fishing also does'nt go well with T-tops either...isn't that what hats are for?
 
Did you just through bolt the bracket, or do you have a large bolting support inside, like how M.J. did his. I love brackets, but wonder why they never just rip off the back with all the weight. ???
 
Re:  On The Fly finished v20 CC w/bracket

whopper55 said:
Just curious. What kind of bracket is it? How much?
Click to expand...

It's a D&D MARINE Bracket about $1100.00 w/ paint and non-skid and hardware, I purchased sone flat aluminum stock-the channel they sent wouln't curve to my transom. You need to send the dimensions to them, transom angle, transom curve,width. http://www.dadmarine.com/pictures__info1.htm
 
Kamikaze gave me some scrap pieces of aluminum that I was able to use as a brace for my bracket. Looks like this on the inside of the transom:

100_1287.jpg


Not too pretty, but that thing ain't going anywhere...
 
Beautiful boat. When I sold my V-20 cuddy, I thought that I would own another hull someday. I think you may have just decided for me that it'd be a CC. There's just something about a boat with elegant lines and few frills that makes it scream "Fish-Catching-Machine!" even just sitting there.
 
You must log in or register to reply here.
Back
Top