captpete13
Senior Member
Garmin 182 and Clarion AM/FM/CD tested ok and shipped. I hope they serve you well.
Needs for the new to me boat
- Thread starter macojoe
- Start date
THEFERMANATOR
God
395062 is the oem number.
captpete13
Senior Member
Not a problem. If there's anything else you need just let me know. I've got a pretty good supply of extra parts.
spareparts
God
what length cables do you need with the control box
THEFERMANATOR
God
Let me know, I haven't shipped the prop yet, so I could throw in the set I have if they're long enough. I also have the side mount control box.
inaforty
Senior Member
Update!
Joe your top is done.
I restitched every seam I could get to without total dismantling the top. Looks like original thread was giving up do to service life and there might have been a tension issue with the stitching. The top only needed a small patch.
Here's what we started with.
Here is the only spot that i could find need a patch.
Here is the stitches failing.
Patch in place.
Top finished!
Joe your top is done.
I restitched every seam I could get to without total dismantling the top. Looks like original thread was giving up do to service life and there might have been a tension issue with the stitching. The top only needed a small patch.
Here's what we started with.
Here is the only spot that i could find need a patch.
Here is the stitches failing.
Patch in place.
Top finished!
inaforty
Senior Member
You're very welcome Joe.
My turn to pay it forward. I have been helped many times by many members here on the board. I lurk a lot here on the board just reading and gathering info and ideas from other folks.
I forgot to tell you I reattached a forward windshield strap that was cut in two.
Greg,
The top wasn't in bad shape at all. The stitching was failing but the Sunbrella is in good shape.
Kamikaze,
We got tired of using the dining room table. We have to have full basements here so it we had room. I built my table up high so I work standing and not bent over. Makes things tough when working with and reaching patterns but it's better than a sore back. Most sail makers have their machines mount in the floor to work large projects. That would cripple me.
My turn to pay it forward. I have been helped many times by many members here on the board. I lurk a lot here on the board just reading and gathering info and ideas from other folks.
I forgot to tell you I reattached a forward windshield strap that was cut in two.
Greg,
The top wasn't in bad shape at all. The stitching was failing but the Sunbrella is in good shape.
Kamikaze,
We got tired of using the dining room table. We have to have full basements here so it we had room. I built my table up high so I work standing and not bent over. Makes things tough when working with and reaching patterns but it's better than a sore back. Most sail makers have their machines mount in the floor to work large projects. That would cripple me.
THEFERMANATOR
God
I've been slow to get much of anything done, but I got the prop and cables boxxed up tonight. Hope to drop it off next day or two to be on its way to you.
THEFERMANATOR
God
Prop and cables are on there way. They look rough, but thecables are still nice and smooth, and the prop always ran smooth and topped out about 5250-5300 on my 1.6l.