More Work done Today

M

msbhammer

God
Well decided to install my LED lights. Just wasnt sure how I was gonna do it. Run the wire inside the cuddy or all the way around to the other side to the fuse box. Well, I decide to do it the hard way and cut the calk and unsrewed those damm fish rod holders that I hate. "Need tank rack"  ;D
Well, just my luck, I run out to West Marine, grab 35 ft. of wire, screws and washers, ect, come home, get all set up, and what do I find !!, wire !!, I already had a bunch of left over wire from when I tore out the old wiring.  >:( >:( >:( What a waiste of cash !!, but "ll keep it for a future stearo for the wifey. Might actually go ahead and run the wire now so I dont haldf to pull the rod holders out again.

Wiring I found.  >:(

DSC02539.jpg


Running the wire.

DSC02538.jpg


Trying my best with that crappy ceiling carpet. Finally cut it and sprayed some 3m Spray to glue it back together.
Wish I didnt have the carpet. Looks more manly with wires hanging down from inside teh cuddy. ;D

DSC02540.jpg


Ok, one side is done.

DSC02541.jpg


Messing with that dam pimp daddy ceiling carpet. >:(
DSC02544.jpg


Wiring to the fuse panel.

DSC02545.jpg


Damm, they work  :o
DSC02542.jpg


DSC02543.jpg
 
Well decided to install my LED lights. Just wasnt sure how I was gonna do it. Run the wire inside the cuddy or all the way around to the other side to the fuse box. Well, I decide to do it the hard way and cut the calk and unsrewed those damm fish rod holders that I hate. "Need tank rack"  ;D
Well, just my luck, I run out to West Marine, grab 35 ft. of wire, screws and washers, ect, come home, get all set up, and what do I find !!, wire !!, I already had a bunch of left over wire from when I tore out the old wiring.  >:( >:( >:( What a waiste of cash !!, but "ll keep it for a future stearo for the wifey. Might actually go ahead and run the wire now so I dont haldf to pull the rod holders out again.

Wiring I found.  >:(

DSC02539.jpg


Running the wire.

DSC02538.jpg


Trying my best with that crappy ceiling carpet. Finally cut it and sprayed some 3m Spray to glue it back together.
Wish I didnt have the carpet. Looks more manly with wires hanging down from inside teh cuddy. ;D

DSC02540.jpg


Ok, one side is done.

DSC02541.jpg


Messing with that dam pimp daddy ceiling carpet. >:(
DSC02544.jpg


Wiring to the fuse panel.

DSC02545.jpg


Damm, they work  :o
DSC02542.jpg


DSC02543.jpg
 
Used #18-2 wire. Shoe string budget on tagging the wiring, but it helps.  ;D Airslot, check your email.

So far done:

1. Sand and stain the wood on the V.
2. Patch dash, not the best, but alot better then what it was.
3. Sand and patch, then repaint bow.
4. Replace tilit trim and rams.
5. New LED lights.
6. New battery cables.

Need to finish:
1. Install pulpit/anchor roller chain/rope hatch cover.
2. sand and repaint lower unit.
3. touch up hull.
4. Install keel trailer guard thing a-bob.
5. Install MJ's or Chum's bracket  ;D
6. Wash the boat big time.
7. Ask wifey for gas money since I'm broke. :o
 
Used #18-2 wire. Shoe string budget on tagging the wiring, but it helps.  ;D Airslot, check your email.

So far done:

1. Sand and stain the wood on the V.
2. Patch dash, not the best, but alot better then what it was.
3. Sand and patch, then repaint bow.
4. Replace tilit trim and rams.
5. New LED lights.
6. New battery cables.

Need to finish:
1. Install pulpit/anchor roller chain/rope hatch cover.
2. sand and repaint lower unit.
3. touch up hull.
4. Install keel trailer guard thing a-bob.
5. Install MJ's or Chum's bracket  ;D
6. Wash the boat big time.
7. Ask wifey for gas money since I'm broke. :o
 
Looks good Hammer. I think maybe I should look for a pulpit. I got my coaming cushions today UPS, they are definitely going to be the nicest thing on my boat.
 
Looks good Hammer. I think maybe I should look for a pulpit. I got my coaming cushions today UPS, they are definitely going to be the nicest thing on my boat.
 
Hey Mulv, you didnt grab Airslot and mine anchor rollers did ya from the UPS guy.  >:(   ;D
Those coaming pads are sweet. I have some "Gay" blue and white trim piece on either side of mine, but dont like them to much. I want YOURS !! ;D

Charlie, thanks for lending me your role of blue Tape.  
 :-*    :P   ;D

Hey Mulv, so how do you mount them ??, they have backing screws in them ?
Didnt you get some sweet deal on the price ??, how long are they ?
 
Hey Mulv, you didnt grab Airslot and mine anchor rollers did ya from the UPS guy.  >:(   ;D
Those coaming pads are sweet. I have some "Gay" blue and white trim piece on either side of mine, but dont like them to much. I want YOURS !! ;D

Charlie, thanks for lending me your role of blue Tape.  
 :-*    :P   ;D

Hey Mulv, so how do you mount them ??, they have backing screws in them ?
Didnt you get some sweet deal on the price ??, how long are they ?
 
You must log in or register to reply here.
Back
Top