Looking Through the Galleries

Sorry parrishht, but i am going to hijack a little more, that is one beautiful boat he has there. any of the original members know what happened to him?

and parrishht, check out MJ's gallery he made a beautiful anchor pulpit ;D
 
Sorry parrishht, but i am going to hijack a little more, that is one beautiful boat he has there. any of the original members know what happened to him?

and parrishht, check out MJ's gallery he made a beautiful anchor pulpit ;D
 
I'll be able to help soon. When the weather actually breaks here, I'll start working on my pulpit...I have some ideas in mind ;D

Mine will probably be fairly wide on deck, almost to the rails and as far back is the slide goes forward. I'll probably thru bolt a cleat on each side. I'll post a pic of a crude drawing in a moment.
 
I'll be able to help soon. When the weather actually breaks here, I'll start working on my pulpit...I have some ideas in mind ;D

Mine will probably be fairly wide on deck, almost to the rails and as far back is the slide goes forward. I'll probably thru bolt a cleat on each side. I'll post a pic of a crude drawing in a moment.
 
OK, here is my drawing. I suck at drawing, so bear with me. I show 3 cleats, a chain tensioner, and a pipe to the rope locker. I have also shown the "center line" and the rails. I'm thinking to make it wide on deck to help distributte the load.

scan0002.jpg
 
OK, here is my drawing. I suck at drawing, so bear with me. I show 3 cleats, a chain tensioner, and a pipe to the rope locker. I have also shown the "center line" and the rails. I'm thinking to make it wide on deck to help distributte the load.

scan0002.jpg
 
Sorry for organizing the hijack Parishht :P

Blue_Runner said:
I think awlgrip is primarily rolled and tipped. Mine has been done from the rubrail down and holds up nicely. You don't even have to wax awlgrip which is one of the best things about it. Just wash it and it will shine and shine.
Click to expand...

BR, what does "tipped" mean?
 
Sorry for organizing the hijack Parishht :P

Blue_Runner said:
I think awlgrip is primarily rolled and tipped. Mine has been done from the rubrail down and holds up nicely. You don't even have to wax awlgrip which is one of the best things about it. Just wash it and it will shine and shine.
Click to expand...

BR, what does "tipped" mean?
 
"Rolled and Tipped" means to very lightly brush the rolled on paint to level the orange peel and roller marks. It should be done with a high quality brush with a two man system, one rolling one tipping.
 
"Rolled and Tipped" means to very lightly brush the rolled on paint to level the orange peel and roller marks. It should be done with a high quality brush with a two man system, one rolling one tipping.
 
No problem on the hijack,
I just wanted to remind people of the second question.

C Y - MJ's is what started me on the idea, I just need some more ideas.


Air - thanks for the sketch, you should see my sketchs
and I'm an engineer.
 
No problem on the hijack,
I just wanted to remind people of the second question.

C Y - MJ's is what started me on the idea, I just need some more ideas.


Air - thanks for the sketch, you should see my sketchs
and I'm an engineer.
 
Just kicking around a lot of ideas.

I even thought about putting a hole in the front end of the hull,
sorta like an ocean liner type anchor.

america-09.jpg


Everything I think of would interfere with docking.
Like offset on the front end, so I don't have to move the Red Green lights.
 
Just kicking around a lot of ideas.

I even thought about putting a hole in the front end of the hull,
sorta like an ocean liner type anchor.

america-09.jpg


Everything I think of would interfere with docking.
Like offset on the front end, so I don't have to move the Red Green lights.
 
LOL. ;D ;D ;D ;D ;D
Speaking of work, its spring time buddy, when ya coming down to see your V. Gotta work on that small damage you had. ;)
 
LOL. ;D ;D ;D ;D ;D
Speaking of work, its spring time buddy, when ya coming down to see your V. Gotta work on that small damage you had. ;)
 
You must log in or register to reply here.
Back
Top