looking for a merc stator.

I have one from a mid 80's 150 mariner model. The part # is either 5454A32 (1/2" thick) or 5454A35 (5/8" thick). I would need to measure it if you think it would work.

Regards
 
I'm pretty sure he will need a 92+ 40 amp dual leg stator. Somewhere in the late 80's or early 90's they went to 40 amp stators with a dual regulator set-up, before then the 40 amp was a single regulator, and before about 88 or so I believe they were all 9 or 16 amp charging systems.
 
You must log in or register to reply here.
Back
Top