Fuel Tank Info

R

RIBoater

New member
Hi All,

I have an '89 V20. Last year my fuel tank developed a leak near the sending unit. The sticker I was able to get through the inspection port was mostly destroyed and only shows that it is an aluminum tank manufactured by a company in Perry, FL. I can't read the company name. Does anyone happen to know what company would have made the tank or maybe a good source for a new one?

Also, how much trouble is it usually to remove this tank. It's a center tank. I'm thinking unscrew the floor panel and it's probably held in with straps and foam. Should I be planning on a weekend project?

Thanks for your help,

RIBoater
 
yes

i had my fuel tank changed about 9 yrs ago 1978 wellcraft
its also a central fuel tank it was held in place with foam
you have to cut away the foam remove the tank replce it with a plastic one you should replace ALL the fuel lines vent,filler, main line to engine
a weelend project definitly
 
But they have since changed their name, there is thread somewhere about that. They are still in business, I believe.
Picture064.jpg
 
There's a company named United Welding Services out of Perry that makes a ton of aluminum products, maybe it's them.
 
RI,

Do a search on the forum. There's been A LOT of discussion about tanks. Some guys have already completed the project and other are in the midst of it even now...
 
Fuell Tank Specs Directory

Here's a little something I started but no info has been added. If you have a 60 gallon Tank, you're in luck.

Had mine made by:

Sunshine Welding
760 Mullet Rd.
Cape Canaveral Fla. 32920
(321)784-4838

Talk to Jim

85WellcraftV20CCfueltankspecs.jpg
 
Fuel Tank Source

If you have a schematic of your tank you might try INCA molded Plastics- they were the OEM for the tank in my 92. Not sure if the aluminum tank is the same design as the Cross Poly Link PLastic tanks used in 92, but they are both 60gal deck models- might be worth a look.


www.incaproducts.com/

Good Luck
 
You must log in or register to reply here.
Back
Top