Last time out I noticed the trailer leaning on the way back home. After further inspection I noticed the left front leaf spring snapped in half due to rust. Its an easy fix but I have been all around town (Corpus Christi TX) and cant find anywhere that has a new one. Is there anywhere I can order one from?
Broke a leaf spring. Were do I get one.
- Thread starter taqwache
- Start date
cterrebonne
God
you would have to take the measurements and then track one down.
www.championtrailers.com has them and they have alot of info on their website.
www.championtrailers.com has them and they have alot of info on their website.
spareparts
God
"red neck trailer parts" (yes, thats the name of it) and "the expiditer" both have web sites and good selection of trailer parts
Check these folks out seems reasonable on most parts
http://www.trailerpartsdepot.com/
http://www.trailerpartsdepot.com/
RWilson2526
God
That's who I have been using as well for my parts.....good selection and decent prices....as they are in MA its next day shipping for me too which is a bonus.
Skools Out
God
www.agrisupply.com will be cheapest
Steplift 72'
Junior Member
Tops Trailers on LA 108 south of Sulphur, LA has about every spring, bolt, bearing, brake or whatever I've needed for a trailer at a fairly reasonable price. I like it where you can drive up and compare the old worn out stuff to save more trips to the dealer.
C
clarktm1275
Guest
I would call a tow company and have it flatbeded to the nearest trailer repair shop. This is seriously a repair to leave to the professionals.
Destroyer
God
Sorry Clark, I gotta disagree with you. By the time you pay for the flatbed, the labor @ $85 an hour, and the spring(s) you could almost buy a trailer. As to the "professionals"... well, that's a matter of opinion. Anyone that gets paid for doing a job is a "professional" in that job.. even if they just walked in off the street the day before. As to the job itself, let's see.. The main spring is usually a "slider" type, so you have one bolt attaching it to the trailer and another bolt up thru the center attaching it and the other leafs to the axle, and two u-bolts holding it all together. Paying someone hundreds of dollars to undo two bolts and two nuts, remove the damaged spring, slide a new spring in and then reinsert two bolts and tighten two nuts is (IMHO) just a waste of money.
Put the trailer up on jackstands, remove the tire for clearance and accessibility, undo the bolts & nuts, remove the damaged leaf, slide the new leaf in, redo the bolts, tighten the nuts on the u-bolts, remount the tire, put trailer back down.. A good backyard mechanic should be able to do the whole job in less than 3 hours and have time for a cold one AFTER the job is done.
C
clarktm1275
Guest
Look up trailer repair in the yellow pages and have a towing company flatbed it to the trailer shop to prevent further damage. They trailer repair shops have special tools to make sure the job is done correctly to D.O.T standards.,
Destroyer
God
Did you even bother to read the preceeding post? What "special tools" do trailer repair shops have I wonder? Ratchet Wrenches? What D.O.T. standards are you making reference to?
Maybe someone doesn't have the time to do the job. That I would understand...but to come in here and make it sound like this is a job for pros only is simply wrong. It's a simple repair that any wrench turner can do safely, quickly and legally, providing they have simple hand tools and the proper replacement part(s).
RidgeRunner
God
Very funny. The only other tool you may need to take it apart is a smoke wrench.
BTW- Does anyone know if the cheap China made springs even have the DOT's approval? I seem to recall there being nothing special at all about the U-bolts, or even the axles for that matter. Down here in redneck country a homemade trailer gets a registration after it has been weighed and there is never any inspection whatsoever.
BTW- Does anyone know if the cheap China made springs even have the DOT's approval? I seem to recall there being nothing special at all about the U-bolts, or even the axles for that matter. Down here in redneck country a homemade trailer gets a registration after it has been weighed and there is never any inspection whatsoever.
Skools Out
God
lol i needed that laugh call a tow truck um can you pass that stuff you smokin this way too lol
agree with you 1000000% Destroyer
Destroyer
Senior Member
Sorry Clark, I gotta disagree with you. By the time you pay for the flatbed, the labor @ $85 an hour, and the spring(s) you could almost buy a trailer. As to the "professionals"... well, that's a matter of opinion. Anyone that gets paid for doing a job is a "professional" in that job.. even if they just walked in off the street the day before. As to the job itself, let's see.. The main spring is usually a "slider" type, so you have one bolt attaching it to the trailer and another bolt up thru the center attaching it and the other leafs to the axle, and two u-bolts holding it all together. Paying someone hundreds of dollars to undo two bolts and two nuts, remove the damaged spring, slide a new spring in and then reinsert two bolts and tighten two nuts is (IMHO) just a waste of money.
Put the trailer up on jackstands, remove the tire for clearance and accessibility, undo the bolts & nuts, remove the damaged leaf, slide the new leaf in, redo the bolts, tighten the nuts on the u-bolts, remount the tire, put trailer back down.. A good backyard mechanic should be able to do the whole job in less than 3 hours and have time for a cold one AFTER the job is done.
Did you even bother to read the preceeding post? What "special tools" do trailer repair shops have I wonder? Ratchet Wrenches? What D.O.T. standards are you making reference to?
Maybe someone doesn't have the time to do the job. That I would understand...but to come in here and make it sound like this is a job for pros only is simply wrong. It's a simple repair that any wrench turner can do safely, quickly and legally, providing they have simple hand tools and the proper replacement part(s).
__________________