Brand New-Never used-Free to a Good Home

[Skycopper]

I just parted with my 30yr old 96 V21 and have several items that someone here should be able to use:
1-Brand New never seen the light of day factory V-Berth cushions. Been hiding under the bed in the spare bedroom since day 1.
2-Brand New never seen the light of day Eisenglass full factory enclosure. Been hiding right next to the cushions.
3-Very lightly used blue sunbrella complete cover, handmade by a local sail maker. Fits tighter than O.J.'s glove. That's the reason it wasn't used too often, my boat hung from davits and it was a bitch to work around them.

All available for free with local pickup, or just pay the actual shipping costs. I really would hate to throw these items out if anyone can use them, but when the new boat arrives, the old stuff will go.

 

[Skycopper]

And I just found two new spare windshield bumpers, the ones that hold the open glass from smacking the fixed glass on the port side. Same conditions as above. These are probably like hens teeth these days.

 

[scook]

The top on my V20 is shot and sent to the landfill. I don't know if yours will fit, or what the shipping (to Oregon) would cost, but I'm interested if no less troublesome option pops up. This would probably be expensive and too big a pain for you to deal with, but if it worked out, I could guarantee a good home.

 

[Skycopper]

Not exactly sure what you mean by "TOP".

 

[scook]

It was a vinyl top covering the seating area, but most that I see are canvas. Like a convertible top on a car - kept the rain and sun off, until the sun degraded it. I’ll see if I can send a photo from my computer.

 

[Skycopper]

If you already have a Bimini top, what I have is the side curtains, rear curtain, and the windshield connector pieces. Is that what you were expecting this to be?

 

[Skycopper]

I will pull mine out from under the bed and take some pics too.

 

[Pipe_Dream]

Nice! Are the v-berth cushions for a 21 the same size as for a 20? Because I really could use some new ones!

 

[Skycopper]

I will measure mine today and if they are the same they are yours.

 

[Skycopper]

Length bow to stern is 66.5" give or take .5ish. Width port to starboard is 65.5-66ish. Hard to be exact, they like to wiggle around under the tape. Shipping will probably be based on oversize rather than weight.

 

[Skycopper]

Windshield bumpers available, I knocked one overboard one day so when I bought the replacement, I got extras.

 

[scook]

This is mine when it had the top. Would love a stand up cover but no Bimini, so probably a non-starter. I'll look at my windshield bumpers to see their condition and freight charges for those would be more reasonable.

Pipe - I have the V berth cushions that were in mine when I got it 20 years ago, and never used them. Would have to confirm, but pretty sure they're in very good shape - I'll never use them and would love for them to go to a good home if freight from Oregon isn't prohibitive. Mine is an '85 and I can get them out and get measurements for you if interested.

 

[scook]

I also have a Danforth anchor that came with the boat and have no use for it.

 

[Skycopper]

I'm going to say my enclosure will not work for you Scott. It does require a Bimini to attach to.

 

[Pipe_Dream]

Length bow to stern is 66.5" give or take .5ish. Width port to starboard is 65.5-66ish. Hard to be exact, they like to wiggle around under the tape. Shipping will probably be based on oversize rather than weight.

Thanks! Those are gorgeous. I will measure what I currently have tomorrow and compare. I wouldn't think they'd be much different but who knows.

 

[Pipe_Dream]

This is mine when it had the top. Would love a stand up cover but no Bimini, so probably a non-starter. I'll look at my windshield bumpers to see their condition and freight charges for those would be more reasonable.

Pipe - I have the V berth cushions that were in mine when I got it 20 years ago, and never used them. Would have to confirm, but pretty sure they're in very good shape - I'll never use them and would love for them to go to a good home if freight from Oregon isn't prohibitive. Mine is an '85 and I can get them out and get measurements for you if interested.

Wow, suddenly I have prospects on not one but two sets of v-berth cushions! Yours being an '85 V-20 they should be the same as my '83 I would think. Thanks, I will let you know!

By the way, that top looks like the one that was on our boat when we first got it. Lasted a long time, but when it went it went. I really liked that style.

 

[Skycopper]

Just let me know if I need to start searching for a shipping box?

 

[scook]

I think we can let that one go. Thanks for processing it with me.

 

[scook]

Pipe - I’ll look for mine and if I find them, will post measurements. If Sky’s work for you, the shipping will probably be less than from the left coast, but if you need mine I’ll get them packaged up.

 

[Pipe_Dream]

Length bow to stern is 66.5" give or take .5ish. Width port to starboard is 65.5-66ish. Hard to be exact, they like to wiggle around under the tape. Shipping will probably be based on oversize rather than weight.

My cuddy from the forwardmost point to the door is 62.5" and the width at the widest point is 67", so these won't work for my V-20. And your cushions come more to a point whereas mine are more of a wide, flat "point." I guess the V-21 has a slightly longer berth with the increased length of the boat. But I appreciate your offer, and I would think that someone here could use them!