fromthedepths
New member
when i decide to paint my boat in the near future do i have to bottom paint below the water line for a trailered boat?
bottom paint
- Thread starter fromthedepths
- Start date
Destroyer
God
NO!!!!!!!
Look at my pics. Never been bottom painted, never been in a slip.. always trailered. Some people put it on for looks, but bottom paint is only needed when you keep you boat in the water at a slip. It leaches poisons that keeps barnacles and other nasties from sticking to your hull.. but if you keep your boat on a trailer it is not needed.
Look at my pics. Never been bottom painted, never been in a slip.. always trailered. Some people put it on for looks, but bottom paint is only needed when you keep you boat in the water at a slip. It leaches poisons that keeps barnacles and other nasties from sticking to your hull.. but if you keep your boat on a trailer it is not needed.
Last edited:
Road King Cole
God
I agree. Definitely do not paint if the boat is not going to be on the water for extended periods of time. Not only does the virgin bottom look great, you will not have the maintenance task of repainting every few years.
spareparts
God
bottom paint will slow you down
rockfishbuster
New member
bottom paint or VC epoxy
My boat was so bad with blisters I had to strip it down to the bare fiberglass, sanded everything smooth with 120, filled all the small holes with west systems epoxy and 403, sand smooth again, put one kit of interprotect 2000E, then went over with interlux VC performance epoxy, You dont need to double coat the epoxy but I bought the interlux at a discount price. Boats been finished 4 years now, I use it a fair amount and no problems with the bottom at all. If your going to do it, do it right the first time, I turned mine over, Dont want to be working on the bottom from underneath.
My boat was so bad with blisters I had to strip it down to the bare fiberglass, sanded everything smooth with 120, filled all the small holes with west systems epoxy and 403, sand smooth again, put one kit of interprotect 2000E, then went over with interlux VC performance epoxy, You dont need to double coat the epoxy but I bought the interlux at a discount price. Boats been finished 4 years now, I use it a fair amount and no problems with the bottom at all. If your going to do it, do it right the first time, I turned mine over, Dont want to be working on the bottom from underneath.
