Best way to rig the anchor ?

[bgreene]

Anyone want to share some pictures of how you rigged your anchor set up ?

On the bow, pulpit, all by hand etc........

 

[reelapeelin]

Anyone want to share some pictures of how you rigged your anchor set up ?

On the bow, pulpit, all by hand etc........

I'm sure you'll get a lot of response to this, but in the meantime, reach up to the tool bar and click on SEARCH...put in anchors, pulpits etc and see what you find...it'll vary widely w/this crowd as there are so many different uses for these boats..

Enjoyed talkin' w/you last night...

 

[SkunkBoat]

I use a pivoting bow roller. Works great. You don't have to go out on deck.
I have have a chain "tensioner" to help hold it but I wrap the chain on the cleat for safety.
I plan to replace the tensioner with a pin type chain lock. I also want to put in a deck pipe to pass the chain thru to the cabin

 

[awthacker]

Here's mine

http://www.wellcraftv20.com/community/showthread.php?t=15360&highlight=anchor

Top of page 2 shows my anchor setup before a few tweaks. I can't say running the line back through the hawse pipe is enjoyable, but I usually leave my anchor line in a pile on the bow until after the last stop for the day... then feed it all back through. If a buddy gets in the cuddy and pulls it down while I feed it from the bow, that works best.

 

[Hedge]

here's the link from the subject about a month ago

http://www.wellcraftv20.com/community/showthread.php?t=16124

 

[bgreene]

Thanks all.