about brackets

  • Thread starter Thread starter racerx
  • Start date Start date
R

racerx

Guest
looking thrue the gallery at you guys boats, it looks like all the boats with brackets are i/o conversions. has anyone tried filling the notch on an outboard boat. if so how did you do it? should i just fill in the transom or should i come all the way across with a ...box? like the boat has on iether side? what about the rub rail? tx guys
 
looking thrue the gallery at you guys boats, it looks like all the boats with brackets are i/o conversions. has anyone tried filling the notch on an outboard boat. if so how did you do it? should i just fill in the transom or should i come all the way across with a ...box? like the boat has on iether side? what about the rub rail? tx guys
 
It might be easy??

You will have to mesure a bracket and mount it at 20 or 25" depending on what you use for a motor?

I recomend a 25" for bracket, but thats my opion.

after you see were its going to bolt on, you will know if it has to be strong to hold the bracket, or just if it needs just to fill the space.

Rub rail, You don't need on on the rear of the boat but if you fell the need they can be had for $$$
 
It might be easy??

You will have to mesure a bracket and mount it at 20 or 25" depending on what you use for a motor?

I recomend a 25" for bracket, but thats my opion.

after you see were its going to bolt on, you will know if it has to be strong to hold the bracket, or just if it needs just to fill the space.

Rub rail, You don't need on on the rear of the boat but if you fell the need they can be had for $$$
 
Hey guys, do any of you know whether a single bracket w/o swim platform from a ???? model Sea Ray would fit an 86 v20? Just curious, thinking about buying one from a fellow member of our forum...

Does the transom angle matter much when installing a bracket w/o a swim platform?

Thanks guys.
 
Hey guys, do any of you know whether a single bracket w/o swim platform from a ???? model Sea Ray would fit an 86 v20? Just curious, thinking about buying one from a fellow member of our forum...

Does the transom angle matter much when installing a bracket w/o a swim platform?

Thanks guys.
 
Mine comes from a 23' Seacraft, then bracket fits right on with no problem, if you no have the swim platform.

The curve in the transom doesn't come into play till you get to the out side,
 
Mine comes from a 23' Seacraft, then bracket fits right on with no problem, if you no have the swim platform.

The curve in the transom doesn't come into play till you get to the out side,
 
What MJ said Grace, my Armstrong is a single w/o swim platforms and it looks pretty flat in that center area, look at my gallery there is a couple of shots of it
 
What MJ said Grace, my Armstrong is a single w/o swim platforms and it looks pretty flat in that center area, look at my gallery there is a couple of shots of it
 
You must log in or register to reply here.
Back
Top