86 V20 with trailer - Free to a good home
- Thread starter GregV20
- Start date
macojoe
Administrator
Thanks everyone!! I have already talked with BS and he said he has a bunch of parts there and can get a merc going for me! That will mean a bracket needed so I will start looking for one, don't know were the money will come from but we will see?? i have till next season to figure it out!
smokeonthewater
God
Sweet!!!!
I wouldn't rule out a powerhead on the seadrive at least as a stop gap till you get the bracket and merc goin.
I wouldn't rule out a powerhead on the seadrive at least as a stop gap till you get the bracket and merc goin.
spareparts
God
I seen a guy use the seadrive bracket as the basis for an outboard bracket. I don't know how he did it, just saw it from a distance and it got me interested
macojoe
Administrator
smokeonthewater
God
Agree... I wouldn't put a lot into it but if all else is good and we can scrape up a good powerhead.....
macojoe
Administrator
yea you never know when something like that wilkl be needed!! my place was loaded with stuff that i could never throw away, in 2005 my son said were did you get that? i said it came from tghe taunton house he said we left there in 1996!! lol yea but i always said i use it someday.
Sorry for being AWOL - I forgot last weekend was family trip to Maine.
I started to take the shrinkwrap off, but stopped when I found a hornet's nest. I took a break to let those bastards go back to sleep while I plan the after-dinner sneak attack.
So far she looks pretty good. It was getting to late and the light was lousy, but I got one picture. If I have time tomorrow morning before I have to head to work, I'll take a few more, otherwise I'll get some up Thurs/Fri.
I started to take the shrinkwrap off, but stopped when I found a hornet's nest. I took a break to let those bastards go back to sleep while I plan the after-dinner sneak attack.
So far she looks pretty good. It was getting to late and the light was lousy, but I got one picture. If I have time tomorrow morning before I have to head to work, I'll take a few more, otherwise I'll get some up Thurs/Fri.
Last edited:
smokeonthewater
God
Here I had waited for news as long as I could stand it and was just coming in to ask for an update....
You just posted 20 min prior lol
Thanks for the update.
MJ I expect to see that sig changed the second you take delivery ;-)
This is so cool!
You just posted 20 min prior lol
Thanks for the update.
MJ I expect to see that sig changed the second you take delivery ;-)
This is so cool!
bradford
God
Found your bracket MJ. The Merc heads might be interested in the engine he has for it.
http://savannah.craigslist.org/boa/5175149903.html
http://savannah.craigslist.org/boa/5175149903.html
Last edited:
captpete13
Senior Member
I just came across this on craigslist. Maybe this will work for you MJ
http://jerseyshore.craigslist.org/bpo/5179962118.html
http://jerseyshore.craigslist.org/bpo/5179962118.html
More Pictures
Took these Monday morning after taking off the shrinkwrap:
Ignore the leaves in the last one - the ridgepole under the shrinkwrap collapsed over the cockpit this winter and tore open a small hole in the shrinkwrap (about 1-2 feet long). It collected leaves and snow, and they fell through. I'll clean that up.
Hopefully you can see the gloss in the hull in the first two pictures. There's a couple of nicks and scuffs in the gelcoat at the bow, but nothing bad. You can sort of see it in the second picture above the rubber block.
I'm not sure where the keys are. You may need to change out the ignition switch. The one in there now is a replacement (from West Marine, I think); I lost the keys once before.
Took these Monday morning after taking off the shrinkwrap:
Ignore the leaves in the last one - the ridgepole under the shrinkwrap collapsed over the cockpit this winter and tore open a small hole in the shrinkwrap (about 1-2 feet long). It collected leaves and snow, and they fell through. I'll clean that up.
Hopefully you can see the gloss in the hull in the first two pictures. There's a couple of nicks and scuffs in the gelcoat at the bow, but nothing bad. You can sort of see it in the second picture above the rubber block.
I'm not sure where the keys are. You may need to change out the ignition switch. The one in there now is a replacement (from West Marine, I think); I lost the keys once before.
