5 Star Trailers

MJ . . . see if they deliver.

TA Mahoney's Number
813-241-6500

I agree with CB . . . unless the frame of your trailer is rotting though spend the $250 and fix it up. Save the rest of the $$ and buy a new one when you catch 2000 pounds of jumbo fluke.
 
Frame is rotting!! I bet I could get 2 more seasons easy out of it? But I want a new one NOW!!
I will give them a call!! Thanks
 
You get a trailer with rollers, disk brakes, tandam, 14" tires, 4200#, lights, flat wire connection.

All the usually stuff. and they are going up fast!! I called one place last week and it was $2300 and this week say $2800.
 
Torsion suspension??

I got all that and 5400 GVWR, in sept. for $2200.
 
Riverhead Trailer... 631-727-6230 ... ask for the hot babe... tell her Seakindly sent ya ;)
 
Thanks all!! I bought a 4200# capacity, 1200#trailer weight, total 5400# all roller, tandam, torsion suspension Loadrite today. I got for $2100

Just in time also!! He said they will be going up on Wed about another $400 to $500 because of the steel shortage??

Thanks all!!
 
WOW!!

You got a great deal,MJ. That's the same trailer as mine, but with the better roller brackets. :P
 
CB, YOU AND MJ are welcome to come down here and wax my boat anytime. ;D

wax on... wax off... ;)
 
Yea go a head and pick on me!! Just because I had to work for the first time in 9 months doen't mean I don't have feelings!! :'( :'(
 
The guy finally goes to work after 9 months of loafing and he's already crying the working man's blues :'( ;D
Oh woe is Joe. :-*

Hey Bud. Go to my gallery pics. I modified one of the pics to show you the ladder setup my buddy made for getting in and out of his boat when at the launch ramp like we were talking about the other day. Not the best picture, but you'll get the idea. Of course his problem now is that he added that bow roller for the anchor. I'll bet he barks up his shins pretty good on that thing. I used it a couple of times and even with the bow rail left unmodified, it was very easy to get on board. I liked your idea too though. I'm sure you'll come up with something.

Get those dimensions for me on the radar arch. Oh, BTW, that reminds me. Would you be wanting any antenna mounts. What I mean is basically a couple of flat plates welded between the two tubes for mounting purposes (don't get any funny ideas. I mean mounting antennas). I already told him to figure in a couple.
 
I forgot what my Idea was?? :-/ But that is easy to make. I bet that roller is a Bit$h when he is trying to get out!!
I can't see his bow rail, does it have a split in it or does he just climb over it??

Yea and I hate work!!!!!!!!!!!!!! Two days now and I must have searved about 20 coustmers!! Stand there all day doing nothing! My back hurst, legs hurt I am not use to this you no!
 
CB would you happen to have a picture of the anchor roller and deck. I'm curious on how the anchor is held tight in the roller and how he changed his running lights. I'm looking for anoyjrt project to fill my spare time. It would be nice to get the anchor out of the way. ;D thanks Bill Mc
 
MJ. the bow was left intact and he climbs over it.

Mac, I'd have to ask him if he has any other photos of the roller setup. I can tell you that he removed the dual red/green light and installed separate ones on either side of the boat. The bow roller is through bolted with an aluminum plate backing it up underneath in the rope locker. He rigged something up from a set of bow chocks and a hole in the shank of the Danforth anchor so that when it's pulled up tight in the roller, you push a pin through the hole in the shank. the anchor rode and chain gets dropped down one of those deck pipes with the hinged lid and a PVC tube below to guide the rode and chain into the locker. I doubt that he has any photos of this but I'll ask.
 
Hey Mac, have you seen the pics of my anchor roller/platform setup in my gallery. There is also a discussion of this project in the modifications forum.
The anchor is held tight by a windline anchor tensioner (see west marine or boaters world catalog).

If you have any questions, please ask them in the other thread. I will be happy to answer them. :)
 
You might want to try Nextrail trailers-800-570-6070. I got a alum.tandem trailer w/ stainless components delivered from the factory for my v-20 for $1850. I think that's a pretty decent deal. I did not opt for the brakes b/c I live less than .25 miles from my drop in site.
 
You must log in or register to reply here.
Back
Top