1978 v20 Center Console.

J

Johnsonboat

Member
12 years since my last v20cc rebuild and had to get another one. Got a rotten transom, deck and stringers for $500. But had a new (2024)60 gal fuel tank and a trailer with new tires. Pulled the cap, replacing transom with marine plywood, coosa stringers and deck core. All vinylester resin laid. I’m attaching pic of pulling cap because it only took an hour once I supported everything. Really easy, wish I did this last time because doing transom from inside is the best in my opinion.
 

Attachments

  • IMG_1410.jpeg
    IMG_1410.jpeg
    3.4 MB · Views: 5
  • IMG_1420.jpeg
    IMG_1420.jpeg
    7.6 MB · Views: 7
  • IMG_1431.jpeg
    IMG_1431.jpeg
    2.5 MB · Views: 7
  • IMG_1432.jpeg
    IMG_1432.jpeg
    6.5 MB · Views: 7
Last edited:
PTSD flare up after seeing those pics. Square nose shovel works good to chunk out that foam. Nice job, demented minds think alike. That’s exactly how I went about my rebuild. I disliked how they cut the top of stringers for the rigging tube crossover. Put mine between stringers when it went back together. Wow, just wow! Keep the photos coming, there are others looking to do the same. Switch caps, etc..
 
You must log in or register to reply here.
Back
Top