Search results

This

I may have the spelling wrong, but it's hard wood used for decking that's simular to teak. I had a bunch of scraps from a decking job at on of the marinas. I was going to build a flat base for the failed out of it on the deck and stick it over the bow a couple inched. The failed is the stainless...

one thing that people don't realize is BRP at one time offered ETEC engine across the board in their company, Motorcycle, side by sides, 4 wheelers, snowmobiles, jet skis, etc... by 2010(IIRC), they were only using ETC in outboard and had gone 4 stroke in every other department. They had every...

I've got 38 years working on marine engines, there's a reason they stopped building etecs

i remember someone made one out of starboard years ago, I was going to make a base out of epe' and mount the fairlead on it, but never did. You run teh chain thru a pvc pipe and into a bucket for storage BTW, i have a maxwell freedom 5000 windlass with rode for $500

buying something with an etec is never a good idea, unless you're ready to repower

I stay away from the politics thread, I come here for the boats and fishing, there are plenty of other sites to discuss politics

This site has had its ups and downs, we are hoping it's back on the upswing and more will come along. There used to be quite a bit of activity on here. I'm usually visiting daily, plenty of others watching, just not much going on right now. As far as B Greene goes, there were plenty of reason...

Take a plastic handle screw driver and tap on the transom with the handle all around it. If it sounds hollow,you may have issues. Check.all around the engine mounting holes. You tap.around it enough,you'll figure out the change in sounds

You can buy a uv dye to add to any fluid from you're local.auto parts store,I've used food coloring before trying g to find leaks from multiple tank set ups(different color for each tank). The uv stuff leaves a pretty decent trail,even without using the uv light, once you put the light on it...

I can get it to Raleigh or Sneads Ferry if needed

Ive got a good friend of mine that build T tops and hard tops down in Charleston. He's very experienced and has been doing it for a while. He used to build Tops for Freeman Boats before they brought it inhouse. the very first thing he will tell you, is watch your weight. You don't want anymore...

replied

screw ebasic power

yes, clam shell cowl, horizontal reed 2.4, $1000 with the stand and what ever i have to go with it (spare set of carbs, etc..) Engine is in Charleston right now

Just an older 200 mercury 2 stroke

selling my personal boat, the "Searona". 1996 17 Sea Hunt, 1999 150 Johnson Ocean runner( 60 degree motor). Hydraulic steering. Flip flop sea. bimini top, plenty of rod holders. Single axle trailer. I'll see if I can upload some pictures. Found a bigger boat that i want. $7500 OBO. Located in...

I'm a marine mechanic with 38 years experience, I used to specialize in stern drives. If you can do the labor, sterndrives can be more affordable than outboards, but there is much more than can go wrong in a stern drive than an outboard. 30 years ago I would have rather had a stern drive...