It's not getting hard

S

steplift20

God
My primer bulb, I pump it but it feels empty, it does not get hard but the motor starts and runs , I don't get it,shouldn't it get firm? It used to ,
any suggestions on what to look at thank you
 
steplift20 said:
My primer bulb, I pump it but it feels empty, it does not get hard but the motor starts and runs , I don't get it,shouldn't it get firm? It used to ,
any suggestions on what to look at thank you
Click to expand...

Have you tried Viagra? :you:

I'd look at your carbs. The floats are supposed to close and stop fuel flow when the bowls are full. Sounds to me like that isn't happening which is why the bulb doesn't get hard. :head:
 
If your motor has a quick disconnect, un hook and see if u can build pressure, if not crimp fuel ine between ball and motor and check then.

If you do need a new ball, i ve had best service out of the mercury OEM. Worst ones are the sierra, rubber does not stay pliable very long

Hey don t worry, happens to everyone occasionally...
 
Phatdaddy it is a Sierra , but it's a new bulb / ball the arrow is pointing to the engine too , weird , and I didn't try viagra , don't need that yet lol ,I like when my ball gets firm, it used to. I'm going to check all the connections first , that should be a one way check valve too I believe, if I take the connection that on the engine I should be able to see fuel coming out ,right? Let you guys know what happens.
 
You must log in or register to reply here.
Back
Top