Seat Boxes

spareparts

spareparts

God
Got a local guy that says he can make seat boxes for our V20's soem one with a v21 take some measurements for me. Height, width, length. How many of ya'll would be willing to buy a new seat box. If this works out, I may be able to get him to make some other small items
 
I would be interested depending on the cost. Did he mention that? Have you seen anything that he has done ? Thanks.
 
mawshj

I will be looking to replace my lounge passenger seat this summer. V20 cuddie 1983. several (maybe 2 I have found) make replacements. (high storage base with snap close flap)(larger then most seat dimensions)(pull out to lounge position)(rot proof frame). I am not sure what your seat box is but I would certainly take a look at it
 
The guy who may be building these is the guy whos making the small skiffs I posted up a while back. Were trying to get some measurements to see if we could be able to adapt an existing mold to work. Don;t have a price yet, I'll be the test subject on this one
 
Just measured it.

39" long x roughly 21" wide x 12" tall. I say roughly cause I measured the front at 21 1/4 and the back was like 20 3/4.

I think it is a bit funny they didn't just go 40" long. Could've used that extra inch a time or two on the fish box side. :haha:
 
Blue_Runner said:
Just measured it.

39" long x roughly 21" wide x 12" tall. I say roughly cause I measured the front at 21 1/4 and the back was like 20 3/4.

I think it is a bit funny they didn't just go 40" long. Could've used that extra inch a time or two on the fish box side. :haha:
Click to expand...

lets be honest, who couldnt use an extra inch
 
working on the plug. Estimated cost is going to be around $250-$300 per box. You will have to trim it to fit the angle of the cockpit floor. It will be square(measurement wise) so you can use it on either side or mount it in the center behind a console. It will have a wood backed top for reinforcment. When we get a prototype done, i'll post up some pictures
 
You must log in or register to reply here.
Back
Top