New member just bought a steplift v20

S

Stevie g

New member
hi my name is steve and im from ri. just recently me and a good friend went halfs on a 1976 steplift v20 with a 200hp mercury. this is our 1st boat and have no boating experience, but i think we chose the perfect boat for a hell of a price the more reading on this website i do. heres a link to the boat http://providence.craigslist.org/boa/675409905.html

now we both know this is a fishing boat but were planing on using it as more of a recreational type(things that 20 year olds do). the 3 seats that came with the boat just simply isn't enough. is it possible to build a bench seat that sort of raps around the stern. has any1 done this? or is there even places that would sell something like that.
boat.jpg

in this location
 
Welcome to the site!

If your not sure yet as to what to do with the boat this might be an option.
1441687_i-515057.jpg
Maximize your comfort with the Offshore Angler® Double Legged Aluminum Folding Chair. Sized to easily seat two people, the folding chair includes 1'' anodized aluminum tubing and corrosion resistant stainless steel hardware with supportive foam padding and low maintenance, heavy-duty vinyl upholstery. Size: 28'' x 47'' x 30-1/2''. Imported.
Order
QtyItem
NumberDescriptionSizeYour
Cost 38-531-783-00
Read Item Notice
1 & 2 below DOUBLE LEGGED ALUMINUM
FOLDING CHAIR28'' x 47'' x 30-1/2''$229.99 NEW Bass Pro Shops


Also look at these boat beanbags
http://www.e-searider.com/
roundgirl.jpg
 
Last edited:
Last edited:
Welcome Stevie, that will be nice when you finish it up. The stand alone benchs like the above pic may be the best setup and allow you the flexibilty to move it inside the boat where you need.
And if you have any twenty something super models to post pics of that help endear you to everyone on this board:hi:
 
Welcome aboard.

Vicariously, yeah that's the ticket.

Anyway, if you are handy with wood and power tools,
I'll bet you could build something.
 
Stevie:

Here's a photo of a seat that I installed on my boat:

http://www.wellcraftv20.com/gallery/album06/H

It's very comfortable and has a lot of storage underneath. I installed a third tank (18 gals) there, and it still has room for spare oil, life preservers, rod holders, etc.

I bought the seat from West Marine:

http://www.westmarine.com/webapp/wcs/stores/servlet/producte/10001/-1/10001/33813/377%20710%201302/1302/Lounge%20Seats/Primary%20Search/mode%20matchallpartial/20/Most%20Popular|1?N=377%20710%201302&Ne=1302&Ntt=Lounge%20Seats&Ntx=mode%20matchallpartial&page=CategoryDisplayLevel1&isLTokenURL=true&storeNum=18&subdeptNum=37&classNum=10952

I cut down the aluminum supports somewhat so that the back would sit flush with the base.

V20s are great all-around boats. Hope you enjoy yours.

Fitz
 
thanks fitz, thats exactly what i was looking for. i wish i had the money for a seat like that. I'm going to try to build something similar to that.

A little off topic but i noticed that you also have a 200hp on the back of your v20, what are you running for top speed?
 
47.5 mph, according to my GPS, at 6,000 RPM, which is the max for my engine. That's using a 14.5 x 18 SS prop.

I have another 14 x 20 prop that came with the boat, which I estimate would crank it to above 50 mph. I've never bothered to check it, though, because the other prop works so well for everything throughout the entire power range, and I think it's good to prop an engine so that it runs toward the high end of its RPM range. I rarely need max top-end speed, anyway.
 
You must log in or register to reply here.
Back
Top