wanted v20 for sale 248

1

1079denis

New member
hi looking for a v20 or 21 ob or io within reasonable distance from wilmington nc . also have a 248 sportsman for sale, had twin io,s they have been removed along with the outdrives, i have owned this boat for over 20 years and it is solid no issues with floors or transom will sell for 500.00 check it out on cregslist wilmington nc thanks denis
 
Airslot said:
Going to craiglist now...
Click to expand...

I looked too. That looks like a good start for a new 4 stroke and bracket, go for it. Further back in craigslist is a Wellcraft 17 CC that is a scaled down V20. There's a couple pictures, not many of the 17's around anymore. They're a little tippy with that much deadrise and the beam narrowed down to 6' something, but have a great ride on plane and the same entry and flare as the V20.
 
here's a link to help out

http://wilmington.craigslist.org/boa/1029771135.html



3n43k83o3ZZZZZZZZZ92a7fc7a7a0263f19e2.jpg
 
Holes are open, you lookin at the grass Hammer. Good basis for a project, but I'm not lookin for a project today...
 
1079denis said:
hi looking for a v20 or 21 ob or io within reasonable distance from wilmington nc . also have a 248 sportsman for sale, had twin io,s they have been removed along with the outdrives, i have owned this boat for over 20 years and it is solid no issues with floors or transom will sell for 500.00 check it out on cregslist wilmington nc thanks denis
Click to expand...

Wow, I almost feel dirty asking, but ... do you have any of the following that you might want to part out?

Cabin Table
Cabin cushions
Sink
Ice box
Wiper motors


Day_em, $500 for the whole thing?

Steve P.
 
248 parts

all those parts are still there . wher are you located? make me an offer!! heck between selling the engines and other parts i almost got what i wanted in the first place its a shame to have dismantled it it was a good solid running boat, just to much boat. had it for over 20 years, my wife sugested i cut the top off and make an inground pool out of it !!! difficult but not imposible anyway i need it gone
 
1079denis said:
all those parts are still there . wher are you located? make me an offer!! heck between selling the engines and other parts i almost got what i wanted in the first place its a shame to have dismantled it it was a good solid running boat, just to much boat. had it for over 20 years, my wife sugested i cut the top off and make an inground pool out of it !!! difficult but not imposible anyway i need it gone
Click to expand...

Does that $500 get the trailer too?
 
1079denis said:
all those parts are still there . wher are you located? make me an offer!! heck between selling the engines and other parts i almost got what i wanted in the first place its a shame to have dismantled it it was a good solid running boat, just to much boat. had it for over 20 years, my wife sugested i cut the top off and make an inground pool out of it !!! difficult but not imposible anyway i need it gone
Click to expand...

I dunno, $100? Can you ship em? I will be down that way but not for a few weeks.
 
248 parts ,boat trailer

$2000 takes it trailer and all, not sure there is going to be much left on the boat, just picked up a v20 that need most of the stuff thats on the 248 ,get in touch when you drive through nc and look see what you need of whats left
 
3.0 in a v

thanks for the response, i also did some research on the web and found a test someone did on 3 new bayliner walkarounds weighing 4400 lbs the 3.0 and the 4cl diesel were at 34.7 mph and the 3.0 outboard was at 44 mph. i figure a v with a 650 lb 3.0 unit it should weigh in at apx 3000 lbs , being optimistic ,38 to 40 mph ?:head:
 
You must log in or register to reply here.
Back
Top