Something Extra

M

msbhammer

God
Figure I go a bit overboard here. Hope ya like it guys.
;)


DSC02571.jpg


DSC02572.jpg


New and bigger cleat. if I could just get my old one off I would have it done. >:(

DSC02573.jpg
 
Hey Air, is this how you are mounting your cleat ??
I understand now about the location of the anchor tension, The shaft of the anchor could hit the chain tension holder. Might have to install that last to find the correct location. Not sure if I like the cleat mounted this way, whatta guys think ??, yes or No ??

DSC02574.jpg
 
Yeah MJ, I was just looking at your gallery for a ref. Not sure what I will do just yet.
I did manage to get those bolts off with channel locks tonight. Thanks. ;)
 
POL_0262.jpg


i mounted mine sideways to allow for the shank on the larger anchors.

if you haven't bought the anchor tensioners yet , i'd hold off and try it without one . just wrap the chain around the cleat. i have 3 buds who got one and never use it now.
 
Hammer, mine plan is to put the cleat cross ways on the back of the pulpit. I have a 10" cleat being delivered today. I think I'll have plenty of room to mount the tensioner inline, will know for sur this afternoon.
 
Air, as far as you anchor rope goes, do you store it all inside the anchor locker, the square section that is cut out, where you see your bow eye for hooking to the trailer. Looks a bit small for alot of rope. ???
 
As stated earlier by Airslot and I, those pulpits could be slightly longer. If mine was only six inches longer, I would be adding this to her. I personally think this is sweet. ;D

cleat.jpg
 
You must log in or register to reply here.
Back
Top