Somebody needs to get this in Delaware!

I think his price is a little high at $2500 ,,, add a $2000 used 150hp and that would put you at $4500,,,, I would do $1500 for the boat and trailer
 
I agree I wouldn't pay 2500 for it and I hope someone steals it from him for $500 or something after what he did to that boat!
 
The PO of the boat was an older retired gentleman who said he was getting rid of the boat because he could no longer take care of it. He was a Marine Biologist and did most of his work out of the boat in Delaware Bay. He lived in Rehobeth DE and he kept the boat in a garage when it wasn't in use. If I remember right, it used to have a 150hp yamaha on it and the only thing that needed to be down was the carbs needed to be cleaned. Both the boat and trailer were in fantastic shape
 
My brother has an 87' Duallie with a 2000 Suzuki 225 that I think he wants to sell for $3500. It has a trailer, but it needs work. The tires and hubs are only a few years old but the trailer has alot of rust and is only a single axle. The suzuki has some surface corrosion which is common for suzuki those years. The lower unit had a hairline crack in the housing that was professionally welded for $250 2 weeks ago. No damage was done to the lower he just noticed a crack starting.

The boat has top notch electronics, a big chartplotter and separate fishfinder. He also has a full enclosure in good shape. The boat needs some work. The cover over the fuel tank is soft and the seats need to be replaced. He has a lounge seat on the drivers side and a pedestal on the passenger side. The transom and floor other than the fuel hatch are solid.

The boat needs a good clean and buff. These are two things my brother is not big on. The boat is currently in the water and used on weekends. His reason for selling is he is downsizining to a smaller boat to fish the back bays.

Contact me if your interested and I'll put you in contact with my brother. He has not listed the boat for sale yet.

Mulv80@aol.com
 
You must log in or register to reply here.
Back
Top