THEFERMANATOR
God
Came across this one this afternoon. Needs a transom.
http://tampa.craigslist.org/hil/boa/3925411318.html
http://tampa.craigslist.org/hil/boa/3925411318.html
project V21
- Thread starter THEFERMANATOR
- Start date
spareparts
God
I'm wondering if a v21 transom wouldn't be easier than a regular v20?
THEFERMANATOR
God
From the other one I seen needing a transom, I would say a big NO! What a nightmare it would be to get it open so you could get in there to all of the little pieces of wood that make up the extension and it's bends, and then if it needs the hulls transom done it would be like doing 2 in 1.
But we all know the classic Raymont Hunter hull is priceless.
reelapeelin
God
I read the above and thought "pour" the I scroll down and see where my mentor took the words right outta my mouth.
art:
art:
There is a link in the very first post to the boat they are talking about
http://tampa.craigslist.org/hil/boa/3925411318.html
http://tampa.craigslist.org/hil/boa/3925411318.html
I read the above and thought "pour" the I scroll down and see where my mentor took the words right outta my mouth.
Pour what ? Concrete ..........?
Pourable transom...probably stronger than concrete and I'm guessing it has to be lighter. Hope I never have to go there...
aussie
Senior Member
that's typical of me a lot of members have links permently on there posts I did miss it
My Transom was poured using this stuff, Click on the link you can now order a free one gallon pail. 
Plywood rated at 1500 PSI
Nida and Arjay is rated at 4000 PSI
http://www.arjaytech.com/
http://www.nida-core.com/spanish/nordprod_nidabond_transom.htm
Plywood rated at 1500 PSI
Nida and Arjay is rated at 4000 PSI
http://www.arjaytech.com/
http://www.nida-core.com/spanish/nordprod_nidabond_transom.htm