Mid-80's V-20 - $450

ssiredfish

Senior Member
Pops needs this boat out of his yard!!!!! He bought it as a project boat but never got around to it. Like I said its a mid-80's V-20 with what looks like an early 90's 175Hp Evinrude that runs. Boat needs a good cleaning and is on a trailer but would have to be flatbedded home or rigged-up as one of the cross beams has dropped.

Askin $450 cause thats what he spent on gas and rigging to get it home from FLA.

I realize I don't have all the info or pics up but if you are interested I will get you whatever you need.......just tryin to help dad out.......
 
Pops needs this boat out of his yard!!!!! He bought it as a project boat but never got around to it. Like I said its a mid-80's V-20 with what looks like an early 90's 175Hp Evinrude that runs. Boat needs a good cleaning and is on a trailer but would have to be flatbedded home or rigged-up as one of the cross beams has dropped.

Askin $450 cause thats what he spent on gas and rigging to get it home from FLA.

I realize I don't have all the info or pics up but if you are interested I will get you whatever you need.......just tryin to help dad out.......

got any pics that you could send? I really need a trailer for my V badly. Do you know if it has brakes on it?
 
got any pics that you could send? I really need a trailer for my V badly. Do you know if it has brakes on it?

Unless you are a welder, you don't want this trailer. I mentioned it would have to be taken on a flatbed trailer or rigged some way. Part of the reason its only 450.
 
About an hour or so from Valdosta, maybe 1.5hrs........

Attached are the pics of "Dad's V". Little moldy on the side but mine looked worse pre-pressure washer and cleaned up great. The floor in the back felt great, he mentioned he did some glassing back there, hatches nice and firm throughout. The front by the steering wheel was a little soft but he said that spot was easy to access and was next on the list. Other than that, she felt solid all around. Didnt hear any loose stringers or anything like that and he said that when he bought it the guy cranked the engine up for him. Hasn't been used since then though.....

The trailer.......This is what I meant when I said it would need some work to get it home. As I mentioned before that would be the hard part about gettin her home but its also one of the reasons its $450.......

If you have any other questions you can call my dad at 912-230-6973(Hal).
 

Attachments

  • IMG_2462.JPG
    IMG_2462.JPG
    75.1 KB · Views: 69
  • IMG_2463.jpg
    IMG_2463.jpg
    50.4 KB · Views: 75
  • IMG_2464.JPG
    IMG_2464.JPG
    74.1 KB · Views: 71
  • IMG_2467.jpg
    IMG_2467.jpg
    61.1 KB · Views: 69
  • IMG_2468.JPG
    IMG_2468.JPG
    72.1 KB · Views: 66
Last edited:
About an hour or so from Valdosta, maybe 1.5hrs........

Attached are the pics of "Dad's V". Little moldy on the side but mine looked worse pre-pressure washer and cleaned up great. The floor in the back felt great, he mentioned he did some glassing back there, hatches nice and firm throughout. The front by the steering wheel was a little soft but he said that spot was easy to access and was next on the list. Other than that, she felt solid all around. Didnt hear any loose stringers or anything like that and he said that when he bought it the guy cranked the engine up for him. Hasn't been used since then though.....

The trailer.......This is what I meant when I said it would need some work to get it home. As I mentioned before that would be the hard part about gettin her home but its also one of the reasons its $450.......

If you have any other questions you can call my dad at 912-230-6973(Hal).


Check your email...
 
I have passed on getting this boat...not because of the boat or price or anything more than I've just got my hands FULL right now and can't take on another...somebody needs to get this...it's a project, no doubt, but lots of goodies here, too...as he suggests, take a trailer w/you to pick it up...
 
Back
Top