making some headway

C

cterrebonne

God
well i have laid down the final layer of prekote and will lightly wet sand this week so i can lay down the 1st coat of brightside (saphire blue). I will say this much prekote is some tough stuff for only being a one part. you can wipe it down with acetone and it doesnt break down.


DSCN1509.jpg


DSCN1510.jpg


DSCN1511.jpg


DSCN1512.jpg
 
use a little more grip for better hold, i always use 80 grit on the boats i paint

oh yeah and a line sander will make the boat much straighter with less cupping, a DA will cup soft material like bondo and fiberglass.
 
Skools Out said:
use a little more grip for better hold, i always use 80 grit on the boats i paint

oh yeah and a line sander will make the boat much straighter with less cupping, a DA will cup soft material like bondo and fiberglass.
Click to expand...

i wish i had a line sander. as you can see the transom is cupped alot but im not worried about that right now because i need to do some glass work on the splashe well aboe it when its flipped and im sure resin wiill flow on it having to sand and repaint.
 
You must log in or register to reply here.
Back
Top