Made the Maiden

M

Mulv80

God
I got out of work early today and the weather was beautiful. I couldnt resist trying to drop the V20 in for a quick ride on the river. The boat ran great, not as fast as I thought it would be but it ran really well. I was only out for a about an hour so I really didnt get to see what the boat could do. Anyway, When it was time to pull the boat I had a problem with the trailer. I tried adjusting the rollers before and thought I had them adjusted properly. The boat scraped on the front rollers. It doesnt seem like there is a lot of clearance between the strakes and the roller assembly arms. I will have to take a picture tommorrow to show what I am talking about. Without a picture none of this makes sense.,
 
Mulv. Congrads on the maiden voyage. I'm hoping to be in the water by May I hope. Take a few pics. of the rollers. I would hate to have the same problem after painting my hull and then get a gouge in her.
 
V20 is very sharp in the front, rollers need to be real close to each other so it won't fall between them!
 
You must log in or register to reply here.
Back
Top