Help West Resin will not kick..

N

nymack66

God
I brought a Gallon of resin from West Marine it will not harden period whats wrong ? I mix a quart with 9 cc of hardener as instructed.
Never did the Resin brought from defunct Boater World failed me as a matter of fact it will always tend to kick early I miss that store .Not to mentioned I paid 1o bucks more per gallon ..
My only option is to wipe it clean with acetone and start over ?

See product in q
http://www.westmarine.com/webapp/wc...=true&storeNum=95&subdeptNum=673&classNum=673
 
change hardener, had a batch go bad on me once, I thought the resin was bad, went adn bought new resin, same thing, before I went back to the store, I tried a different tube of hardener, it ste off, tried it with the old resin, worked fine, luckily I hadn't found any where to get rid of the old resin
 
I went thru a lot of resin on my rebuild. The ambient temperature and humidity reaks havoc with kick times. Unfortunately, the hardener does go bad. I used to keep the MEKP in the fridge. Mini-Craft of Florida is a good supplier. Let me know if you need something. Vic
 
Stillrunning said:
Lowes in my are sells Elmer's resin which works very well for I think $19.00 a gallon.
Click to expand...

Are you sure ? The Lowes here sells a quart for 14:99 ..
It was a simple backing plate for my anchor platform I was making out of plywood laminated in resin , I will wipe the piece off and try with new hardener, I did use an old batch ..My fault I guess, thanks guy's
 
Never had that problem. I bought all my poly resin from Carolina Classic boat builders. They sold me 3 gallons and the MEK for $15.00. Great folks! It kicked like crazy!
 
Thanks guys its got to be MEK, I am ashamed at myself to have this happen to me since I worked with over 4 gal of this stuff last summer..
I will test a small batch this weekend , I was glassing a peice of ply wood 2" x 14" to use as support/reinforcement for my anchor platform to be placed inside the cuddy under the deck I will post pictures once completed
 
nymack66 said:
Thanks guys its got to be MEK, I am ashamed at myself to have this happen to me since I worked with over 4 gal of this stuff last summer..
I will test a small batch this weekend , I was glassing a peice of ply wood 2" x 14" to use as support/reinforcement for my anchor platform to be placed inside the cuddy under the deck I will post pictures once completed
Click to expand...


Don't feel badly . . . I left a whole pail 5 gallons of resin outside. The cap wasn't on tight and water leaked in . . . Now I have a bucket of resin that won't cure :( There goes $120 out the window.
 
You must log in or register to reply here.
Back
Top