Checking stator

S

steplift20

God
150 1988 Mercury out board, I had a problem with my engine and I am going to change my 2 switch boxes but I want to check my stator, my question is this, I have the batterys out of the boat do I have to install my battery to do the test? I know it has to be grounded to the engine and turned off but do I have to put the batterys in. Can it be tested with the batterys out.
 
steplift20 said:
150 1988 Mercury out board, I had a problem with my engine and I am going to change my 2 switch boxes but I want to check my stator, my question is this, I have the batterys out of the boat do I have to install my battery to do the test? I know it has to be grounded to the engine and turned off but do I have to put the batterys in. Can it be tested with the batterys out.
Click to expand...

Good video of checking stator
https://www.youtube.com/watch?v=zlxIyOa_DkA
 
stator outputs should be checked while spinning the engine over using a DVA adaptor hooked to a volt meter. But you can check stator resistance using an ohm meter
 
You must log in or register to reply here.
Back
Top