Search results

Dirty rotten thief cut off my trailer plug. I thought it would be a simple matter to buy a new plug. But no. There's 5 wires on the trailer. Four wire plug on my car. I know the old trailer plug was 4 wires (i would have noticed if they did not fit, hehe!). I cant get to the wire junction on...

I recently started two threads about "is this is a good engine" and building a jack plate because the engine is 25" shaft, my transom is 20". I bought the engine and the seller helped me mount it. Just a few hours ago, actually. His reaction on seeing my transom was "looks like someone cut it...

I am purchasing a used 175 offshore merc with a 25" shaft. I have a 20" transom. Thinking of making my own bracket using 4 pieces of angle bracket. Motor weighs about 400 lbs, i think (per NADA) Smokeonthewater recommened 3x4 angle, but should it be 3/8" or is 1/2" safer? I Like overkill...

Im considering this motor for my v20: http://wilmington.craigslist.org/boa/4667359177.html Looking for feedback if this model is worth considering, or does it have a history of problems? Is the price reasonable? I would of course do a compression test and look at the oil in the lower unit...

Hi everyone. Looking for some advice. I want to replace my engine control box. I have an older 86 Johnson GT150. It has the red plug. I have not found a direct replacement, but maybe this one could be made to work http://www.offshoremarineparts.com/4-5006180.html. Is it as simple as splicing...

Hi everyone, I did a search first, came up empty. Here's the problem: I have damaged threads on the lower unit oil drain plug. No water intrusion yet, but I'm fixing it this winter. My plan is to drill a bigger hole and insert a helicoil. Here's the questions: 1) is the helicoil the best...

I just took off the engine off my boat for its initial rehabilitation (it has not been run in many years). It's an '86 Johnson GT150. All parts of the steering system are seized, except for the cable. But since I had to cut the cable to get the engine off, that is now a moot point. I do have a...

What is the proper method to attach safety chains to an aluminum trailer? I would like to replace the existing safety chains on my aluminum trailer. The PO has the chains attached via a bolt & washer. The bolt & washer go through a chain link, and screw into a threaded insert on trailer frame...

Does anyone know where to rent or borrow a trailer tongue scale in southeastern NC (I'm in Wilmington, NC)? Buying a used one is an option if the price is right. I know I can buy a new one online for $140, but I dislike spending much money on a tool that I will only use once or twice. Thanks!

Brought home my new (to me) V20 today. It needs work. The gelcoat is oxidized, the floor is mostly soft, the passenger seat is missing, and the engine has been sitting for 5 years (it does have good compression). But I think the price was right. Trailer is good. Also has a hummingbird fish...

Hopefully someone from NC can help answer this question... I found a V20, price is right for its condition. The seller has a title from the previous owner, but he never titled it in his own name. I assume its not a big deal to for the seller to sign it over to me? Should any notary (like at a...

Hello everyone. I've been reading this forum for a while, and decided to join because I have a question. I went to look at a 1987 Wellcraft V20 cuddy-cabin with a 2000 Optimax 225 HP today. I have looked at several other used boats, but didn't seriously consider buying...