Search results

150 Yamaha I was quoted 16,550. Ridiculous

My ole girl hates a following sea.....that's all I gotta say

I think it's like 111 lbs. I need stern weight 111 pounds is the difference. If y'all remember the earlier pics of my boats it shows I need stern weight. Check the chine out in the rear. This boat runs super light

What I'm thinking is the exhaust cam locked up and the spit gear everywhere

Just got a great price. 150 Suzuki, new prop,gauge,binnacle, harness and hydraulic uniflex steering installed all for $13,775.

Here is the plug in question. Steel plugs were used......not very smart. This is my motor

140 was great on my boat but I'm looking for a little more giddy up so the 150 Suzuki is really what I'm eyeballing. I have 2 fishing buddy's pushing me towards yamaha 150

Lost my motor Sunday and I'm gonna go brandnew. I want everybody's opinion. I know quite a bit about both but I want yalls opinion. Are yammy a really worth the extra money? And go!

Just a reminder if you decide to replace that tank i will buy it from you

The Starboard XL board i used will conform to the top and will create memory. I used clamps to keep it clamped to the top. My top when it was originally made the top was held down with stainless screws the were drilled a tapped.

Thanks for all the info fellas.

I used a material called aruaco pine. It passes the boil test,uses exterior grade glue,has minimal if no voids. And is kiln dried. Thats very very very close to marine ply specs for only 35 to 40 dollars a sheet. My ejole boat is built with it.

Took 9 days for my last batch of 5200 to go off. The fast cure as stated 2 or 3 days....regular cure says 7 days on the caulk tube in ideal conditions.

Hardtop installed and antennas

I drilled my holes a 1/2 inch larger than my motors bolts. I then hotcoated the holes and taped one side closed. I then filled the hole with thickened resin and then glassed 2 patches of 1.5 csm on either side. The next day i drilled the holes to the actuall bolts size leaving 1/4 ring of glass...

T-top mounted. Electronics box mounted. And did some wiring.

The tops looks awesome on the boat.

Thanks Spare much appreciated!

We fished out of oregon inlet there where like 3 boats out filming that day. Im not sure if thats one or not.

S little over one quart painted my boat....one tack coat then one heavy "flow" or finish coat. Its beautiful!