Search results

yeap sure is that's why it works so good.

it will have 6 prong head as that setting had a princess orig. they just change the head to fit the new diamond shape

what you guys think? it's a 1.22 ct oval diamond I'm going to have set in a different setting at Jared's here's the setting I'm going to have this diamond set in what ya think? the diamond in the pic of the setting is .72 ct Jared's had to use as example.

this may sound crazy but Poly resin mixed with bondo filler will work too. i've used bondo added to my resin with no bondo hardner just little extra resin hardner.

hold the reeds up in the light and make sure you can't see any light around the reeds.

first thing what ever cylinder that dry plug came out of it has no fuel so it is a dead hole for sure. second get a set of Champion L77JC4 plugs for it, those V plug suck usually on the older ign. systems. as for first problem it is pointing to your reeds since you rebuilt the carbs or you have...

that Tilt trim looks good actually. just the motor is rusted which is command on those tt sections. nothing $60 won't fix. is that a 150 a 175 or a 235 motor?

48 to 52 depending on water condictions, as for your motor i'm sure i could get it running. if it's a Johnson / Evinrude I can usually get them running right. Finished up a pair of 200s last yr that had be sunk in salt and left then sat 2 yrs in the air and were stuck. very little work they run...

it could be leaking from the VRO pump check the pump before you do to much running so you don't lean it out and hurt a piston.

good looking starter hull i bet that old Johnson would run with little work.

Happy Birthday V20 Brother now get that other brother status done for Lee and I :)

sure i could use them. and thanks BR you'll meet her this yr i hope at Denton. here's a pic of my future bride

Thanks Guys It was wonderful thanks to my wonderful future bride.

that cat one wasn't funny at all.

ok found out by running the vin tag on the side of the block. it came out of a 2005 Box truck 4500 series, the miles are right though has 69k. it had ext oil cooler and extra oil cap reservoir with an ext oil pump. it has the reg oil pump internal too odd motor huh. it says the motor rating is...

a friend of mine said to bore it to the 427 motor. he has a 427 out of a 2011 vette in his 57 chevy, but it has a ton of motor work in it too. his dynoed at 863 hp at the rear tires. it's a strong car. it has the 6 speed auto though.

that's what the tag says and what i was told not 100% sure no. the dealership put a new oil pump in it and replaced the cooling lines even the drysump was replaced. nothing fixed it. the dealership said it needed new main bearings and that would fix it.

Hey Ferm, What do you know about the 2005 GM 6.0 motors? I have one that has the Aluminum heads and cast block, it has oil pressure at idle till it gets warm then no oil pressure at idle but it has good oil pressure driving. any ideas? I've got it on a crate so not a prob to open it up. I'm...

i have a wiring diag for the motor what part ya need? I have a wiring diag book on all outboards built from 1959 to 2009.