Search results

probably not. I think you'd be the first. Moving the hole down and aft to line up might make it possible later. You could try widening the hole back to the transom. My steering was still 1/2" from coming out.

FINALLY! Video: https://www.youtube.com/watch?v=MspLGpDBd04&t=181s monster 58" YFT. At "the Princess" aka "AP". 48 miles SE of Manasquan Inlet. Hit first jig dropped on a questionable choice of rods:head:... We gaffed it 1.16 miles from the hookup spot. we were on for an hour and a...

had one on for 15-20 minutes yesterday afternoon at that spot. Straightened the hook:nut: didn't get the stink off but I covered it up some with bent rod fabreeze

We have the skunk stink when it comes to catching tuna this year. Watched other boats catch them on 4 trips. But FYI, there are bluefins at Humpty Dumpty/Little Italy. Less than 20 miles from Manasquan. Well in range of V20s All you need is a good day which has been very hard to come by this...

I feel better!

I don't see pvc bilge pass thru under the tank? What about bilge water from anchor locker and fwd center? Whats your plan?

never happen. nobody wants a cuddy or an express. They are selling 37 ft bowriders now.

:clap:

I pulled the carpet down from the ceiling. Horrible job....glue dust.... The dried orange glue was a problem. I never got around laying on my back to sand it and have it fall in my face. So I never did paint it. Still much better than the stinky carpet

While you have it opened up, don't forget to re-do your deck drains/hoses/scuppers. I had a hard time finding original sizes. Ended up changing to new & bigger stainless scuppers

"scuppers" = overboard deck drains I would be good to look down the drain hole of the fishboxand see if there is junk blocking the pvc pipe that passes bilge water under the fuel tank.

think hard about that:head:

I would do everything possible before removing the cap. That is the most difficult thing you could possibly do on a V20. That is a rebuild project. You have a cuddy model right? Two simple things you can do... two things you should have done the day after you bought it... Remove the gunnel...

if you think the boat is listing because of a leak in the seam under the rubrail, you need to look for water that is trapped and not draining to the rear bilge pump. The list may be unrelated to the seam but you need to look for a cause. You can remove the gunnel boxes. That will give you a...

IMO; You are over-thinking/over doing it with the battery. Leave it where it is. I ran a V20 cuddy with zuke DF140 on a single Grp27 Dual Purpose battery. Did that for 12 years. Replaced the battery about every 5 years. I did not even have a battery on/off switch.(although I would recommend...

to Block island from where? its only 12 miles from point judith inlet to great salt pond. a seaworthy v20 in good weather with a seaworthy captain would have no problem with that do you have a seaworthy v20 and are you a seaworthy captain? if so then all you need is the right weather for a...

did it again today. 3 man limit..30 BSB at shark river reef. Plus two 5 gal buckets full of red hake at the Arundo wreck

looks good. I thought you were going to switch to 25" Maybe that was the other guy?

Another 3 man limit on BSB today at Shark River Reef. Today they were on wrecks and not on the tops of rockpiles. No pix...I'm slacking on the camera lately Edit: buddy had a picture...

How to attach a small enough file using the "Paperclip"