Search results

I just run a 28ga kodiak on the back deck in front of the engine.

Seal was correct, a mother to get the glass installed with the seal on it, tiiiight fit in the aluminium channel. I ended up doing a stupid and broke the glass doing the install, crash everywhere, ****! Got out of the boat, cracked a mountian dew, lit a smoke and sobbed. Got on ebay and found a...

Personally after years of boats and replacing cables every 4 to 5 yrs, i finally stepped up and bought hydraulic steering, i got the Marel brand from japan, first reason is they use bearings in the pump(helm) and second was it cost less. I will never have a cable steer agian!

I also have a 2stroke G1 EVINRUDE 200HO on my V20, love it for all use. I can rip the handle out of a slalom skiers hands or troll out in the ocean. I run the Rebel 3 blade SS 15.25 x 17p. It tops out around 49mph with all mt canvas and arch, radar and antennas. I average between 2.4 to 2.8mpg...

Windshield..replacement..void...found one Looking for passenger side front glass, broke mine trying to reinstall. Unless someone has exact measurements, they corners are 45'd. Found windshield on ebay, on way to me.

Looks like company called Aluminum 2000/ bomar, subsidiary of pompanette llc shows the seal, now to see if i can get it from them. Update: Bomar sent me a seal sample, found the right glass seal, got 30' coming, $3.00 a foot.

Yup, they giggled. I am working with Taylor glass, they sent me all of theirs and competition that do factory boat windows, waiting for another email back from Taylor.

Anyone know where to purchase the windshield rubber U-channel for the windshield?? I have not had much luck locating the right stuff, close but not the same. Picture included--5/16"w x 9/16"D:head:

If you think it is injectors...run a bottle of Redline SI1...if it clears up afterwards, you had dirty injectors, if you still have the same issue...its not the injectors most likely.

Northwest west coast...

Go hydraulic, no question, once and done. I prefer the Marol brand of hyd steering, the helm/pump uses 2 bearings instead of 2 bushings. What it cost me for a dual cable nfb set up the first time was within 200 of the hyd system. Cables worked great for a couple years, but gradually got...

Great link, thanks. I took my old ones, did some glass work to them and shot them with a bedliner then mounted the rod holders. Going on year 3 and going strong.

Correct, AGM and lead acid charge differently, that is why most AGM batteries die early. I have had no computer issues with my Evinrude and the computers in 10 seasons with all the computers on her. Just my experience and opinion, if you gave me a Merc verado....i would not take it.

It would to be great to have a Agm starting battery and 2 DC house batteries, but where to put them? I use 2 group 27dc delays, I power alot of equipment, more than alot of bigger boats. I would not be suprised to see merc require a Agm for starting, alot of cars do. I was just stating that a...

Sorry, I still disagree with you, I sold Deka(east Penn manufacturing) batteries for years and had factory training. Some manufacturers, maybe, not all batteries are the same despite their purpose. I will leave it there.

Cannot say for NJ, but in Washington state I just had my transom rebuilt with polycore for $3450 out the door. Most places wanted 4500 to 5000 with standard marine plywood.

Bgreene, here it is..looky looky..radar and soft top..

First, I also run a 200HO Evinrude Etec like bgreene. Speed capability in excess of 50knts. Economy I do as well or better than any 4 stroke on the market. I average 2.4mpg to 3.0 mph depending on load and water conditions. As for water play, skiing etc, 2 strokes just come out of the hole...

I have to disagree, any quality deep cycle battery will do the job of starting any outboard on the market. If you run alot of electronics like me, that's all you want. Personally I run 2 dekaney group 27 deep cycles on my boat. I start a 200HO Etec, have 2 vhfs always on, hds7 gen2 and a elite 5...

Pretty well got her where I what her. We fish off the Washington coast anywhere from the beach for king salmon to 13 to 35 miles offshore for halibut and ling cod to 75 miles offshore for albacore tuna. Have spent several years getting her here. Hydraulic steering was probably the best add I...