Search results

Master negotiator, president trump aint. He’s having to back off tariffs as the inflationary impact is more than MAGA can bear. Never mind the entire premise of making a trade imbalance an “Emergency” that would give him the authority. The courts will likely take away that authority. What...

10-4. I had a death grip on the drill and side handle as it was a rod holder, needed the angle, so I was working off the pilot bit, expecting it. It didn’t matter…

I agree, but there is a time and place. Your kinda making my point

Interestingly, income tax never stopped being deducted from my Pay. I feel the IRS should cease to function first…. In any shutdown.😳

I got a nice boo boo on my topside from hole saw grabbing, 1/2inch drill almost broke my wrist

Seal the core if it has one would be my only other recommendation. That Scook just handed out some golden tips to help anybody looking to make a hole

Plus materials and beer😁

Well the going rate is a nickel an hour

Wow, thanks for the compliments. Made my day for sure

On taking it apart, I had equipment to make it easier. Wellcraft used vinylester putty on top of stringers to bond cap to hull. Craploads of ss screws under that rub rail and silicone there as well. Using steady upward pressure on cap with forklifts (hull literally hovering off two ropes...

Big project. I had my cap off. I feel the only issue you might have is the bulkheads. Center console has the raised deck so the foreword most bulkhead is really tall so that it supports the casting deck. Using the same year hull almost assures you the stringer height is the same.

Besides there is contingency money for snap. The ones which hold the cards are just trying to inflict as much pain as possible on the poor. Can we agree that whomever is in charge should not wait until the last minute to fund the govt. no more golf or vacations until they figure this out.

Hey we can agree to disagree. Not sure what leverage you think the dems have. Never used the product you mentioned but snow bowl works wonders on removing tannin acid stains from the hull. Another product that works well is Alina-bright. It’s all acid base and rough on gelcoat.

Had to add wedge for it to clear winch stand of trailer. Hawse pipe on deck so rose can be stored in locker. Not concerned with deck rotting as it was replaced years ago with Coosa

So I give up trying to post it straight. Built it from marine plywood, I know, wood cores suck but it’s real strong. Doubled up with glass in between, then a wedge shaped piece to contour to the deck. Held in place with the bolts that hold the bow roller as well as the hitching post. Fully...

Does the Yamaha need to see oil pressure before firing on that motor? Spare?

It’s been a minute. Love the boats to death. Plan on giving mine a good washing today.