Search results

Just got back from Suwannee, part one of a double header in the books. Ready for Charleston, be there Thurs. evening. Who's riding with me?

Draglink was interested but the freight was the issue. This handrail wraps around the back of the console where the step is on the side. It has two mounting pads per side plus a rear center post that attaches at the rear of the console. The rear center post can be seen in the picture...

Nice boat, Got rid of one to buy the Whaler. Hull is similar to the 20-V a little less deadrise, 16 deg.

Lake testing the center console Sat. I was coming into the dock and the motor wouldn't throttle down to idle. It would only go down to about 1200 rpm. Still sounded good but could not pull the throttle back to neutral so I turned back to the side of the lake and killed the ignition. Removed...

Here is my buddy with a nice catch out of Grand Isle. Here is one at Cocodrie Inn Liquid libation.

Found them stacked up on one another and what a beautiful day it was at the mouth of the Suwannee River. At the "Honey Hole" it took one cast each and my 75 yr old mom and I had our keeper Redfish. I mean, double hookup, (frozen bait) shrimp tipped jig that weren't even thawed out yet. A 20"...

Read the sign below. Forget The Cows and the Chic Fil A Ads. Eat More Pork It is Healthy For You.

I feel like Yoda, without the Force. PhatDaddy, damn that was a real old fashioned whoopin the Seminoles put on my Gators. I didn't watch much, too painful. Cleaned fish for most of the game (Sand Trout, Whiting, Croaker, Redfish) Congratulations on a great season. The Seminoles had a better...

What do I need to do? 4-stroke Late Model Raycor Filter plus the factory filters were all muddled up. Fuel line is getting soft. My buddy may have put off the replacement of the fuel lines too long. Now it won't turn full RPM and the idle has gone south. If it was a Merc I would be pulling...

Here are two pictures Slightly Twisted. I am not sure what model year console it fits other than the 1983. If I need to measure something let me know.

I have a original equipment welded SS handrail for a 1983 20' Steplift Center Console. It is the one that wraps around the back side of the console and goes up over the windscreen. It attaches to the console with two round flanges per side and one center bolt in the back. Deleted it for a T-top...

The parts arrived. I got the spindles welded back on the axle tube and they are as straight as I can make them. Used a straight edge and a micrometer off the straight axle tube A better picture of the bad spindle and the axle bolted back under. Sprayed Corrosion X all over the 2 yr old...

Nice older go fast with a couple fishin V-8's on the Suwannee this past weekend.

I had virtually the same boat with a single 250 and a bracket so I could close in the transom. I miss it on occasion.

The spindles are junk. Both sides fried. The carnage. No sign of any bearings only the races left on the hubs. Grabbed the tires on the good axle and there is no preload on the bearings, too loose. On the bright side, the tire/wheel/hub assembly was easy to remove, no tools required...

Got to where I was going and discovered one axle on the trailer had thrown off the buddy bearings and spit the bearings out. (both sides) Strange thing was, I had no idea. Pulled just fine, next day moved it from the wash station to the shed and I could hear some grinding with the window down...

SOLD SOLD SOLD SOLD SOLD SOLD 2000 Boston Whaler 23' Outrage Considering trades and/or offers. 2000 225 Optimax 30" Shaft Engine hours 418 as of 8/1/11 Small chip in the skeg. Continental Tandem Axle Trailer - Galvanized Steel With one year old radial tires (approx 2000 miles) new hubs...

I have some chrome plated zamak pad eyes on one of my boats. Therefore I have some pad eyes that need replacing. Problem is I cannot find the correct size in any material let alone stainless. I need to replace all four and the holes in the boat are 1 1/8" center to center. I have spent the...

Check your bloody trailer springs. If you have a spring type setup and not a set of them fancy torsion jobs. I have had no issues for 10 years with this trailer. Did I say that out loud? I pull the boat out of the barn for a little clean up and notice the tire is on the fender. Broken...

I was lucky enough to see the USAF Thunderbirds this past weekend. If you never had the pleasure, make time and go see them or the Blue Angels. Lakeland, FL became the busiest airport in the nation last week as the Sun-N-Fun Fly In brought hundreds of airplanes to our little town. A lot of...