Search results

I'm selling my V20 price reduced to $6500 or best offer I'm selling my boat http://jerseyshore.craigslist.org/boa/5798181606.html

My wife has been asking me to raise the passenger seat so she can see better. She is short. Instead of blowing her off like I usually do I saw this as an opportunity to build a cool seat. I used the original base as a template. I just built it taller. Once the base was built out of plywood I...

I am parting out a 2005 150xl carb. I just put a few things on craigslist. http://jerseyshore.craigslist.org/bpo/5472331479.html http://jerseyshore.craigslist.org/bpo/5472322545.html http://jerseyshore.craigslist.org/bpo/5472308913.html I have plenty of other stuff off the motor...

My rod pockets have seen better days. I have been looking for a replacement for a while. A place in Florida had some nice ones but the shipping was just as much as the product. So I kept an eye on Craigslist. And I scored a nice set only one town away. Only a little short. No big deal. I'll just...

I came across this arch on craigslist. It measured 7' wide which was perfect. The mounts were some generic swivel things that would not work for me. So I cut them off and lowered it a little closer to my top. I then had plates welded connecting the front and back legs. I also had plates welded...

So my wife and I were discussing how much fun we had the last time we all went down there. We decided it's time to start planning another one. I ran it past the guys yesterday and they all agreed. So I'm just putting it out there for everyone to start thinking about it. I figure sometime in...

I got this boat from my dad. It was kind of repayment for building his v20. I cleaned it up and now I'm gonna sell it. All it needs is electronics and a new owner. http://jerseyshore.craigslist.org/boa/4532903817.html

Like the title says. I need to make some improvements to my house and don't really feel like going into debt. If I can sell my boat for a good price I just might do it. I never thought I would do it but prioritys change. Anyway My boat is a 1981 v20 with a 2007 merc optimax 225. The motor runs...

Garmin 178c price reduced This unit was off my boat. I have owned it since new. But I recently upgraded to a 740s. It was always flush mounted so I don't have the original mounting bracket. Included is the gps antenna,power cord, and if I can find my extra transducer. I am asking $100 I also...

Lowrance x16 price reduced I removed this from a customers boat who I installed a Garmin 740s. The unit works fine except the GPS antenna wasn't picking up satellites. I wired a Garmin antenna to it and it works great. Included is the transducer,Garmin gps antenna,the original Lorance...

I'm selling my 150 Yamaha. The model number on the clamp bracket is 150 etxf but the powerhead is from Barnegatv20 and I think it was etxh if I remember right. The motor ran great. Compression was 120psi on all cylinders. I recently replaced the water pump and resealed the lower unit. I also...

not this dark side I'm talking this dark side so off with the old 150 Yammie and on with the new (to me) Opti. I still have some rigging to connect. But that won't take long. I'm probably going to move the batteries to the cuddy to balance out the extra weight. I can't...

Well I finally found one. I got a text from my friend at 6:30 this morning. "Sorry for the text so early but it can't wait. There is a Bullet Boat for sale on craigslist and it won't last". So I went right to the laptop and found the listing. It was only in the next town over. So I responded. By...

on and off for the last 2 years I have been rebuilding a V20 that I gave to my dad. when he first saw my boat he lit up. He told me that he always wanted on of these boats. I just so happened to be sitting on two extra hulls. So I gave him one for fathers day. He had just recently retired and I...

I recently found out that a local boat club, the Jersey Outlaws, who race old speed skiffs and garveys, also race little outboard boats. Specificly 13' Bullet Boats. I have got to get in on this. I have owned a few of these boats in the past. They are a real blast to drive. I have seen a few on...

This boat has been sunk for over a year. The owner walked away from the boat and his house. It is a 30 walkaround Proline. It had a pair of 225 Optimax. We got title to the boat. My boss wanted to clean it up and sell it but he decided to just give it to a buddy of his. But before he gave it up...

I was going to post on Spare's thread but I didn't want to hyjack. We had a boat wash up on the beach yesterday morning. I got a chance to really test out the new 9000lb winches I put on my trailer. We drove out onto the beach with the trailer and a few trucks. I winched the boat out of the...

I woke up at 4:45 this morning and hit the water by 5:30. I cleared the inlet and despite all the other boats heading north I went south and man did it pay off. At first there was nothing on my fish finder. By the time I reached Bay head my finder lit up. I dropped a bunker spoon and began to...

I got this one this morning trolling bunker spoons right off the inlet. It's 40" and weighed 19lbs.

I just removed a pair of CMC hydraulic jack plates from a boat. There is no real wiring to speak of. No relays. The guy removed them and had them wired directly to a heavy duty switch. I have the switches. One has a sender for a gauge. But I don't have the gauge. Both go up and down fine. No...