Search results

What do you think about this motor does anyone know of any issues with this motor, not sure of the year I am waiting to here back from seller. http://miami.craigslist.org/mdc/boa/1833559306.html

you guys just confirmed my suspicions on the deal, I need a 25" anyway. Thanks

Any thoughts on this motor for $2000 What do you think for my 75' V ? http://longisland.craigslist.org/boa/1765906256.html

Also how do I get the little pieces of info under the pic ( name of boat etc. )

How do I get a picture of my boat to come up on the left side under my user name every time I post ?

He also told me that you really can't see anything in the clear bulb on the Raycor's, is this true ?

My local marina told me that the Yamaha fuel/water seperator filters are better than the Racors, he sells both, wondering if it's true ?

Just redid transom, setting up gas tanks ( 20 gal saddle tanks ) wondering should I use just one racor setup for both tanks, or should I use one per tank. If I do one per tank then I need some kind of " y " fitting to get one line back to the motor, correct? When I got the boat it was already...

Thanks for your input

I am trying to put back together my lower unit when I took it apart this pin fell out and I am not sure which way it goes back in. It is item # 36 in this diagram (shift plunger ) it is a pin that is rounded on one end and square on the other. It engages the shift rod. The diagram is to blury to...

I'll post pics soon

No I used layers of marine ply and West resin with 17 oz. bidirectional cloth backed with 3/4 oz glass mat

weight I'm looking for the raw spec, no engine, no fuel, I believe it's 1920 lbs. just not positive. The link doesn't go back to 75'. Thanks

Can anyone tell me the weight of my 75' v20 cuddy, regular outboard setup ?

Yeah Curapa I put three layers of glass and plenty of resin on the top of transom already, I was thinking the same as you but it does make sense what destroyer is saying. I just don't know where to get it made so it will fit my thickness?

I just finished my transom job. MY question is do I have to put a cap on it and if so what do I use? The transom isa 2-1/4" thick.

I just redid my transom and now I need a motor. 150 HP 25" shaft

I just redid my transom and now I need a motor. 150 HP 25" shaft Somewhere within 100 miles of Long Island, New York

chain storage Hey that's really nice looking and of course functional, I was thinking of doing that but haven't figured out the best way to get the chain through the deck without using the little round fitting ( too much of a pain to feed the anchor rope through every time). I don't want to...

Thanks, I also saw a couple at Sears that looked good.